This patch adds support for Microchip's lan78xx families
of USB Ethernet controllers to ethtool's dump registers
command.
This patch is for use with the lan78xx driver.
Signed-off-by: Raghuram Chary J <raghuramchary.jallipa...@microchip.com>
---
Makefile.am | 2 +-
ethtool.c | 1 +
internal.h | 4 +++
lan78xx.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 93 insertions(+), 1 deletion(-)
create mode 100644 lan78xx.c
diff --git a/Makefile.am b/Makefile.am
index edbda57..14f79b6 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -14,7 +14,7 @@ ethtool_SOURCES += \
pcnet32.c realtek.c tg3.c marvell.c vioc.c \
smsc911x.c at76c50x-usb.c sfc.c stmmac.c \
sff-common.c sff-common.h sfpid.c sfpdiag.c \
- ixgbevf.c tse.c vmxnet3.c qsfp.c qsfp.h fjes.c
+ ixgbevf.c tse.c vmxnet3.c qsfp.c qsfp.h fjes.c lan78xx.c
endif
TESTS = test-cmdline test-features
diff --git a/ethtool.c b/ethtool.c
index da7421c..3494402 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -1160,6 +1160,7 @@ static const struct {
{ "altera_tse", altera_tse_dump_regs },
{ "vmxnet3", vmxnet3_dump_regs },
{ "fjes", fjes_dump_regs },
+ { "lan78xx", lan78xx_dump_regs },
#endif
};
diff --git a/internal.h b/internal.h
index 913f4eb..b239dc7 100644
--- a/internal.h
+++ b/internal.h
@@ -350,4 +350,8 @@ void sff8636_show_all(const __u8 *id, __u32 eeprom_len);
/* FUJITSU Extended Socket network device */
int fjes_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs);
+
+/* MICROCHIP LAN78XX USB ETHERNET Controller */
+int lan78xx_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs);
+
#endif /* ETHTOOL_INTERNAL_H__ */
diff --git a/lan78xx.c b/lan78xx.c
new file mode 100644
index 0000000..bb64e80
--- /dev/null
+++ b/lan78xx.c
@@ -0,0 +1,87 @@
+#include <stdio.h>
+#include <string.h>
+#include "internal.h"
+
+int lan78xx_dump_regs(struct ethtool_drvinfo *info, struct ethtool_regs *regs)
+{
+ unsigned int *lan78xx_reg = (unsigned int *)regs->data;
+
+ fprintf(stdout, "LAN78xx Registers:\n");
+ fprintf(stdout, "------------------\n");
+ fprintf(stdout, "ID_REV = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "INT_STS = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "HW_CFG = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "PMT_CTRL = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "E2P_CMD = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "E2P_DATA = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "USB_STATUS = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "VLAN_TYPE = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "\n");
+
+ fprintf(stdout, "MAC Registers:\n");
+ fprintf(stdout, "--------------\n");
+ fprintf(stdout, "MAC_CR = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "MAC_RX = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "MAC_TX = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "FLOW = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "ERR_STS = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "MII_ACC = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "MII_DATA = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "EEE_TX_LPI_REQ_DLY = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "EEE_TW_TX_SYS = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "EEE_TX_LPI_REM_DLY = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "WUCSR = 0x%08X\n", *lan78xx_reg++);
+ fprintf(stdout, "\n");
+
+ fprintf(stdout, "PHY Registers:\n");
+ fprintf(stdout, "--------------\n");
+ fprintf(stdout, "Mode Control = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Mode Status = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Device identifier1 = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Device identifier2 = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Auto-Neg Advertisement = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "Auto-Neg Link Partner Ability = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "Auto-Neg Expansion = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Auto-Neg Next Page TX = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Auto-Neg Link Partner Next Page RX = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "1000BASE-T Control = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "1000BASE-T Status = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Reserved = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Reserved = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "MMD Access Control = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "MMD Access Address/Data = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "1000BASE-T Status Extension1 = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "1000BASE-TX Status Extension = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "1000BASE-T Status Extension2 = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "Bypass Control = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout,
+ "100BASE-TX/1000BASE-T Rx Error Counter = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout,
+ "100BASE-TX/1000BASE-T FC Err Counter = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout,
+ "10BASE-T/100BASE-TX/1000BASE-T LD Counter = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "Extended 10BASE-T Control and Status = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "Extended PHY Control1 = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Extended PHY Control2 = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Interrupt Mask = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Interrupt Status = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Reserved = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Auxiliary Control and Status = 0x%04X\n",
+ *lan78xx_reg++);
+ fprintf(stdout, "LED Mode Select = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "LED Behavior = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "Extended Page Access = 0x%04X\n", *lan78xx_reg++);
+ fprintf(stdout, "\n");
+
+ return 0;
+}
--
2.16.2
