From: Shalom Toledo <shal...@mellanox.com> Some of the opcodes don't use in, out or both mboxes. In such cases, the mbox address is a reserved field and FW expects it to be zero.
Signed-off-by: Shalom Toledo <shal...@mellanox.com> Signed-off-by: Jiri Pirko <j...@mellanox.com> Signed-off-by: Ido Schimmel <ido...@mellanox.com> --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index 85faa87bf42d..e30c6ce3dcb4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1519,8 +1519,7 @@ static int mlxsw_pci_cmd_exec(void *bus_priv, u16 opcode, u8 opcode_mod, u8 *p_status) { struct mlxsw_pci *mlxsw_pci = bus_priv; - dma_addr_t in_mapaddr = mlxsw_pci->cmd.in_mbox.mapaddr; - dma_addr_t out_mapaddr = mlxsw_pci->cmd.out_mbox.mapaddr; + dma_addr_t in_mapaddr = 0, out_mapaddr = 0; bool evreq = mlxsw_pci->cmd.nopoll; unsigned long timeout = msecs_to_jiffies(MLXSW_PCI_CIR_TIMEOUT_MSECS); bool *p_wait_done = &mlxsw_pci->cmd.wait_done; @@ -1532,11 +1531,15 @@ static int mlxsw_pci_cmd_exec(void *bus_priv, u16 opcode, u8 opcode_mod, if (err) return err; - if (in_mbox) + if (in_mbox) { memcpy(mlxsw_pci->cmd.in_mbox.buf, in_mbox, in_mbox_size); + in_mapaddr = mlxsw_pci->cmd.in_mbox.mapaddr; + } mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, upper_32_bits(in_mapaddr)); mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, lower_32_bits(in_mapaddr)); + if (out_mbox) + out_mapaddr = mlxsw_pci->cmd.out_mbox.mapaddr; mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, upper_32_bits(out_mapaddr)); mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, lower_32_bits(out_mapaddr)); -- 2.14.3