John, Please apply this patch to wireless-2.6. It arises due to an updating of the PHY initialization routines.
Michael - the same changes will be needed for bcm43xx-d80211. Thanks, Larry =================================================== This patch updates the PHY initialization code for bcm43xx-softmac to conform with recent changes in the clean-room specs at http://bcm-specs.sipsolutions.net. Mostly, these changes implement the sequence needed for chips with GPHY revision 8; however, the patch also corrects a typo in one address, and some parts that were missing from the spec when the initial coding was done. Signed-off-by: Larry Finger <[EMAIL PROTECTED]> Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_phy.c =================================================================== --- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_phy.c +++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_phy.c @@ -361,7 +361,7 @@ static void bcm43xx_phy_setupg(struct bc if (phy->rev <= 2) for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++) bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg1[i]); - else if ((phy->rev == 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200)) + else if ((phy->rev >= 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200)) for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++) bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg3[i]); else @@ -371,7 +371,7 @@ static void bcm43xx_phy_setupg(struct bc if (phy->rev == 2) for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++) bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]); - else if ((phy->rev > 2) && (phy->rev <= 7)) + else if ((phy->rev > 2) && (phy->rev <= 8)) for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++) bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr2[i]); @@ -1197,7 +1197,7 @@ static void bcm43xx_phy_initg(struct bcm if (phy->rev == 1) bcm43xx_phy_initb5(bcm); - else if (phy->rev >= 2 && phy->rev <= 7) + else bcm43xx_phy_initb6(bcm); if (phy->rev >= 2 || phy->connected) bcm43xx_phy_inita(bcm); @@ -1241,23 +1241,22 @@ static void bcm43xx_phy_initg(struct bcm bcm43xx_phy_lo_g_measure(bcm); } else { if (radio->version == 0x2050 && radio->revision == 8) { - //FIXME + bcm43xx_radio_write16(bcm, 0x0052, + (radio->txctl1 << 4) | radio->txctl2); } else { bcm43xx_radio_write16(bcm, 0x0052, (bcm43xx_radio_read16(bcm, 0x0052) & 0xFFF0) | radio->txctl1); } if (phy->rev >= 6) { - /* bcm43xx_phy_write(bcm, 0x0036, (bcm43xx_phy_read(bcm, 0x0036) - & 0xF000) | (FIXME << 12)); - */ + & 0xF000) | (radio->txctl2 << 12)); } if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) bcm43xx_phy_write(bcm, 0x002E, 0x8075); else - bcm43xx_phy_write(bcm, 0x003E, 0x807F); + bcm43xx_phy_write(bcm, 0x002E, 0x807F); if (phy->rev < 2) bcm43xx_phy_write(bcm, 0x002F, 0x0101); else ============================================== - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
