On Mon, Jan 01, 2018 at 10:35:25AM +0000, Stefan Chulski wrote: > > > -----Original Message----- > > Hi Russell, > > > > Indeed. RGMII MAC behaves same way, although it shouldn't be named as 'in- > > band' to be on par with the specifications. Anyway - this one is rather a > > stub for > > being able to work with ACPI, so once the MDIO bus works there, this will be > > out of any concerns. > > Hi Marcin, > > This is correct. > "in-band" supported only for SGMII mode. > IRQ link interrupt depend on "in-band"' auto negation only if "in-band"' > enabled. > But IRQ link interrupt could be triggered with "in-band", "out-band" or with > specific fixed speed/duplex/flow_contol.
Hi Stefan, How does this work in RGMII mode - is this handled by the PP2 polling the PHY to get the speed, duplex and flow control settings? Thanks. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up
