chip->phy_addr_sel_strap is declared as a bool, but is also used as an
integer address base.

Rename 'phy_addr_sel_strap' to 'phy_addr_base', and change type to int.

Signed-off-by: Egil Hjelmeland <pri...@egil-hjelmeland.no>
---
 drivers/net/dsa/lan9303-core.c | 20 ++++++++++----------
 include/linux/dsa/lan9303.h    |  2 +-
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 944901f03f8b..3088cdc5d205 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -479,7 +479,8 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip)
 {
        int reg;
 
-       /* depending on the 'phy_addr_sel_strap' setting, the three phys are
+       /* Calculate chip->phy_addr_base:
+        * Depending on the 'phy_addr_sel_strap' setting, the three phys are
         * using IDs 0-1-2 or IDs 1-2-3. We cannot read back the
         * 'phy_addr_sel_strap' setting directly, so we need a test, which
         * configuration is active:
@@ -495,12 +496,12 @@ static int lan9303_detect_phy_setup(struct lan9303 *chip)
        }
 
        if ((reg != 0) && (reg != 0xffff))
-               chip->phy_addr_sel_strap = 1;
+               chip->phy_addr_base = 1;
        else
-               chip->phy_addr_sel_strap = 0;
+               chip->phy_addr_base = 0;
 
        dev_dbg(chip->dev, "Phy setup '%s' detected\n",
-               chip->phy_addr_sel_strap ? "1-2-3" : "0-1-2");
+               chip->phy_addr_base ? "1-2-3" : "0-1-2");
 
        return 0;
 }
@@ -1019,7 +1020,7 @@ static int lan9303_get_sset_count(struct dsa_switch *ds)
 static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
 {
        struct lan9303 *chip = ds->priv;
-       int phy_base = chip->phy_addr_sel_strap;
+       int phy_base = chip->phy_addr_base;
 
        if (phy == phy_base)
                return lan9303_virt_phy_reg_read(chip, regnum);
@@ -1033,7 +1034,7 @@ static int lan9303_phy_write(struct dsa_switch *ds, int 
phy, int regnum,
                             u16 val)
 {
        struct lan9303 *chip = ds->priv;
-       int phy_base = chip->phy_addr_sel_strap;
+       int phy_base = chip->phy_addr_base;
 
        if (phy == phy_base)
                return lan9303_virt_phy_reg_write(chip, regnum, val);
@@ -1070,7 +1071,7 @@ static void lan9303_adjust_link(struct dsa_switch *ds, 
int port,
 
        res =  lan9303_phy_write(ds, port, MII_BMCR, ctl);
 
-       if (port == chip->phy_addr_sel_strap) {
+       if (port == chip->phy_addr_base) {
                /* Virtual Phy: Remove Turbo 200Mbit mode */
                lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
 
@@ -1094,8 +1095,7 @@ static void lan9303_port_disable(struct dsa_switch *ds, 
int port,
        struct lan9303 *chip = ds->priv;
 
        lan9303_disable_processing_port(chip, port);
-       lan9303_phy_write(ds, chip->phy_addr_sel_strap + port,
-                         MII_BMCR, BMCR_PDOWN);
+       lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
 }
 
 static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
@@ -1289,7 +1289,7 @@ static int lan9303_register_switch(struct lan9303 *chip)
 
        chip->ds->priv = chip;
        chip->ds->ops = &lan9303_switch_ops;
-       chip->ds->phys_mii_mask = chip->phy_addr_sel_strap ? 0xe : 0x7;
+       chip->ds->phys_mii_mask = chip->phy_addr_base ? 0xe : 0x7;
 
        return dsa_register_switch(chip->ds);
 }
diff --git a/include/linux/dsa/lan9303.h b/include/linux/dsa/lan9303.h
index b6514c29563f..b4f22112ba75 100644
--- a/include/linux/dsa/lan9303.h
+++ b/include/linux/dsa/lan9303.h
@@ -23,7 +23,7 @@ struct lan9303 {
        struct regmap_irq_chip_data *irq_data;
        struct gpio_desc *reset_gpio;
        u32 reset_duration; /* in [ms] */
-       bool phy_addr_sel_strap;
+       int phy_addr_base;
        struct dsa_switch *ds;
        struct mutex indirect_mutex; /* protect indexed register access */
        struct mutex alr_mutex; /* protect ALR access */
-- 
2.14.1

Reply via email to