From: Jassi Brar <[email protected]>
Hi,
Changes since v3
# Discard 'socionext,snq-mdio', and simply use 'mdio' subnode.
# Use ioremap on ucode region as well, instead of memremap.
Changes since v2
# Use 'mdio' subnode in DT bindings.
# Use phy_interface_mode_is_rgmii(), instead of open coding the check.
# Use readl/b with eeprom_base pointer.
# Unregister mdio bus upon failure in probe.
Changes since v1
# Switched from using memremap to ioremap
# Implemented ndo_do_ioctl callback
# Defined optional 'dma-coherent' DT property
Jassi Brar (3):
dt-bindings: net: Add DT bindings for Socionext Netsec
net: socionext: Add Synquacer NetSec driver
MAINTAINERS: Add entry for Socionext ethernet driver
.../devicetree/bindings/net/socionext-netsec.txt | 55 +
MAINTAINERS | 7 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/socionext/Kconfig | 29 +
drivers/net/ethernet/socionext/Makefile | 1 +
drivers/net/ethernet/socionext/netsec.c | 1844 ++++++++++++++++++++
7 files changed, 1938 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt
create mode 100644 drivers/net/ethernet/socionext/Kconfig
create mode 100644 drivers/net/ethernet/socionext/Makefile
create mode 100644 drivers/net/ethernet/socionext/netsec.c
--
2.7.4
