[PATCH net] phylink: ensure the PHY interface mode is appropriately set

[Russell King]

When setting the ethtool settings, ensure that the validated PHY
interface mode is propagated to the current link settings, so that
2500BaseX can be selected.

Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index f7a777475762..e30339fca5cf 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1136,6 +1136,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
        mutex_lock(&pl->state_mutex);
        /* Configure the MAC to match the new settings */
        linkmode_copy(pl->link_config.advertising, 
our_kset.link_modes.advertising);
+       pl->link_config.interface = config.interface;
        pl->link_config.speed = our_kset.base.speed;
        pl->link_config.duplex = our_kset.base.duplex;
        pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
-- 
2.7.4