This macro is only used by the RTL8211B code. RTL8211E and RTL8211F both
use other bits to initialize the RTL821x_INER register.
No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
 drivers/net/phy/realtek.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9708aa9c58dd..59f0688e4d28 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -21,7 +21,7 @@
 #define RTL821x_PHYSR_DUPLEX   BIT(13)
 #define RTL821x_PHYSR_SPEED    GENMASK(15, 14)
 #define RTL821x_INER           0x12
-#define RTL821x_INER_INIT      0x6400
+#define RTL8211B_INER_INIT     0x6400
 #define RTL821x_INSR           0x13
 #define RTL821x_PAGE_SELECT    0x1f
 #define RTL8211E_INER_LINK_STATUS      BIT(10)
@@ -92,7 +92,7 @@ static int rtl8211b_config_intr(struct phy_device *phydev)
 
        if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
                err = phy_write(phydev, RTL821x_INER,
-                               RTL821x_INER_INIT);
+                               RTL8211B_INER_INIT);
        else
                err = phy_write(phydev, RTL821x_INER, 0);
 
-- 
2.15.1

Reply via email to