[PATCH] net: phy-micrel: check return code in flp center function

[Max Uvarov]

Fix obvious typo that first return value is set but not checked.

Signed-off-by: Max Uvarov <muva...@gmail.com>
---
 drivers/net/phy/micrel.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index fdb43dd..ab46141 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -496,16 +496,18 @@ static int ksz9031_of_load_skew_values(struct phy_device 
*phydev,
        return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
 }
 
+/* Center KSZ9031RNX FLP timing at 16ms. */
 static int ksz9031_center_flp_timing(struct phy_device *phydev)
 {
        int result;
 
-       /* Center KSZ9031RNX FLP timing at 16ms. */
        result = ksz9031_extended_write(phydev, OP_DATA, 0,
                                        MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006);
+       if (result)
+               return result;
+
        result = ksz9031_extended_write(phydev, OP_DATA, 0,
                                        MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80);
-
        if (result)
                return result;
 
-- 
2.5.0