Hi Stephen & rest of list,
I'm having a peculiar problem with the sky2 driver.
The problem is seen on the versions in kernels 2.6.16.16,
2.6.17.8 and 2.6.18-rc4.
The problem appears when uploading large files (for instance
via scp) _from_ the system in question. Downloads work OK,
as does normal interactive traffic against the remote system.
What happens is typically this: After transeferring some
data, ranging from less than 100kB to 10MB, the upload freezes,
i.e. gets no further. Use of ping shows the connection is
effectively dead. If I do a sequence /sbin/ifdown eth0
/sbin/ifup eth0 the upload might resume, but stops again
shortly. The phenomenon seems to occur sooner if the path
to the remote system is _fast_ (low ping times).
The system in question works OK using the WLAN interface,
and also the wired connection works flawlessly in both
directions when running under (ugh!) WinXP.
# lspci
[...]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E
Fast Ethernet Controller (rev 10)
# cat /proc/interrupts
[...]
17: 10568 IO-APIC-level yenta, uhci_hcd:usb5, sky2,
[EMAIL PROTECTED]:0000:00:02.0
Any ideas...?
Please CC replies to [EMAIL PROTECTED]
Regards,
-- Jon Wikne
Department of Physics
University of Oslo
Norway
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
