The mvneta controller provides a 8-bit register to update the pending
Tx descriptor counter. Then, a maximum of 255 Tx descriptors can be
added at once. In the current code the mvneta_txq_pend_desc_add function
assumes the caller takes care of this limit. But it is not the case. In
some situations (xmit_more flag), more than 255 descriptors are added.
When this happens, the Tx descriptor counter register is updated with a
wrong value, which breaks the whole Tx queue management.
This patch fixes the issue by allowing the mvneta_txq_pend_desc_add
function to process more than 255 Tx descriptors.
Fixes: 2a90f7e1d5d0 ("net: mvneta: add xmit_more support")
Cc: [email protected] # 4.11+
Signed-off-by: Simon Guinot <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c
b/drivers/net/ethernet/marvell/mvneta.c
index 64a04975bcf8..027c08ce4e5d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -816,11 +816,14 @@ static void mvneta_txq_pend_desc_add(struct mvneta_port
*pp,
{
u32 val;
- /* Only 255 descriptors can be added at once ; Assume caller
- * process TX desriptors in quanta less than 256
- */
- val = pend_desc + txq->pending;
- mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+ pend_desc += txq->pending;
+
+ /* Only 255 Tx descriptors can be added at once */
+ while (pend_desc > 0) {
+ val = min(pend_desc, 255);
+ mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
+ pend_desc -= val;
+ }
txq->pending = 0;
}
@@ -2413,8 +2416,7 @@ static int mvneta_tx(struct sk_buff *skb, struct
net_device *dev)
if (txq->count >= txq->tx_stop_threshold)
netif_tx_stop_queue(nq);
- if (!skb->xmit_more || netif_xmit_stopped(nq) ||
- txq->pending + frags > MVNETA_TXQ_DEC_SENT_MASK)
+ if (!skb->xmit_more || netif_xmit_stopped(nq))
mvneta_txq_pend_desc_add(pp, txq, frags);
else
txq->pending += frags;
--
2.9.3
