Most of the DSA code still check ds->enabled_port_mask directly to
inspect a given port type instead of using the provided dsa_is_user_port
helper. Change this.
Signed-off-by: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
---
drivers/net/dsa/bcm_sf2.c | 9 ++++-----
drivers/net/dsa/bcm_sf2_cfp.c | 2 +-
drivers/net/dsa/mt7530.c | 4 ++--
drivers/net/dsa/qca8k.c | 4 ++--
net/dsa/dsa.c | 2 +-
net/dsa/legacy.c | 4 ++--
6 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2574a52ee161..7f47400e557e 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -652,8 +652,7 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
* bcm_sf2_sw_setup
*/
for (port = 0; port < DSA_MAX_PORTS; port++) {
- if ((1 << port) & ds->enabled_port_mask ||
- dsa_is_cpu_port(ds, port))
+ if (dsa_is_user_port(ds, port) || dsa_is_cpu_port(ds, port))
bcm_sf2_port_disable(ds, port, NULL);
}
@@ -676,7 +675,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
bcm_sf2_gphy_enable_set(ds, true);
for (port = 0; port < DSA_MAX_PORTS; port++) {
- if ((1 << port) & ds->enabled_port_mask)
+ if (dsa_is_user_port(ds, port))
bcm_sf2_port_setup(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
@@ -771,7 +770,7 @@ static void bcm_sf2_sw_configure_vlan(struct dsa_switch *ds)
bcm_sf2_vlan_op(priv, ARLA_VTBL_CMD_CLEAR);
for (port = 0; port < priv->hw_params.num_ports; port++) {
- if (!((1 << port) & ds->enabled_port_mask))
+ if (!dsa_is_user_port(ds, port))
continue;
core_writel(priv, 1, CORE_DEFAULT_1Q_TAG_P(port));
@@ -786,7 +785,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
/* Enable all valid ports and disable those unused */
for (port = 0; port < priv->hw_params.num_ports; port++) {
/* IMP port receives special treatment */
- if ((1 << port) & ds->enabled_port_mask)
+ if (dsa_is_user_port(ds, port))
bcm_sf2_port_setup(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 4feb507eeee0..b721a2009b50 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -750,7 +750,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int
port,
port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES;
if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
- !(BIT(port_num) & ds->enabled_port_mask) ||
+ !dsa_is_user_port(ds, port_num) ||
port_num >= priv->hw_params.num_ports)
return -EINVAL;
/*
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 21431be2831e..d1d4eea6a875 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -781,7 +781,7 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
* same bridge. If the port is disabled, port matrix is kept
* and not being setup until the port becomes enabled.
*/
- if (ds->enabled_port_mask & BIT(i) && i != port) {
+ if (dsa_is_user_port(ds, i) && i != port) {
if (dsa_to_port(ds, i)->bridge_dev != bridge)
continue;
if (priv->ports[i].enable)
@@ -818,7 +818,7 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
* in the same bridge. If the port is disabled, port matrix
* is kept and not being setup until the port becomes enabled.
*/
- if (ds->enabled_port_mask & BIT(i) && i != port) {
+ if (dsa_is_user_port(ds, i) && i != port) {
if (dsa_to_port(ds, i)->bridge_dev != bridge)
continue;
if (priv->ports[i].enable)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index d1b0b1fb632f..37125858fe80 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -536,7 +536,7 @@ qca8k_setup(struct dsa_switch *ds)
/* Disable MAC by default on all user ports */
for (i = 1; i < QCA8K_NUM_PORTS; i++)
- if (ds->enabled_port_mask & BIT(i))
+ if (dsa_is_user_port(ds, i))
qca8k_port_set_status(priv, i, 0);
/* Forward all unknown frames to CPU port for Linux processing */
@@ -556,7 +556,7 @@ qca8k_setup(struct dsa_switch *ds)
}
/* Invividual user ports get connected to CPU port only */
- if (ds->enabled_port_mask & BIT(i)) {
+ if (dsa_is_user_port(ds, i)) {
int shift = 16 * (i % 2);
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index a3abf7a7b9a2..fe0081730305 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -201,7 +201,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct
net_device *dev,
#ifdef CONFIG_PM_SLEEP
static bool dsa_is_port_initialized(struct dsa_switch *ds, int p)
{
- return ds->enabled_port_mask & (1 << p) && ds->ports[p].slave;
+ return dsa_is_user_port(ds, p) && ds->ports[p].slave;
}
int dsa_switch_suspend(struct dsa_switch *ds)
diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c
index 93c1c43bcc58..0b79c6171d0d 100644
--- a/net/dsa/legacy.c
+++ b/net/dsa/legacy.c
@@ -190,7 +190,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds,
ds->ports[i].dn = cd->port_dn[i];
ds->ports[i].cpu_dp = dst->cpu_dp;
- if (!(ds->enabled_port_mask & (1 << i)))
+ if (dsa_is_user_port(ds, i))
continue;
ret = dsa_slave_create(&ds->ports[i], cd->port_names[i]);
@@ -258,7 +258,7 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
/* Destroy network devices for physical switch ports. */
for (port = 0; port < ds->num_ports; port++) {
- if (!(ds->enabled_port_mask & (1 << port)))
+ if (!dsa_is_user_port(ds, port))
continue;
if (!ds->ports[port].slave)
--
2.14.3
