[PATCH 2/2] blackfin: ezbrd: Remove non-functional DSA/KSZ8893M code

[Florian Fainelli]

There is no in tree driver for the KSZ8893M switch driver, so just get rid of
the code in that board file.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 arch/blackfin/mach-bf518/boards/ezbrd.c | 47 ---------------------------------
 1 file changed, 47 deletions(-)

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c 
b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d022112927c2..c51d1b810ac3 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -25,7 +25,6 @@
 #include <asm/dpmc.h>
 #include <asm/bfin_sdh.h>
 #include <linux/spi/ad7877.h>
-#include <net/dsa.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -105,11 +104,7 @@ static const unsigned short bfin_mac_peripherals[] = {
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
        {
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-               .addr = 3,
-#else
                .addr = 1,
-#endif
                .irq = IRQ_MAC_PHYINT,
        },
 };
@@ -119,9 +114,6 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data 
= {
        .phydev_data = bfin_phydev_data,
        .phy_mode = PHY_INTERFACE_MODE_MII,
        .mac_peripherals = bfin_mac_peripherals,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-       .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip 
MAC */
-#endif
        .vlan1_mask = 1,
        .vlan2_mask = 2,
 };
@@ -140,29 +132,6 @@ static struct platform_device bfin_mac_device = {
        }
 };
 
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-static struct dsa_chip_data ksz8893m_switch_chip_data = {
-       .mii_bus = &bfin_mii_bus.dev,
-       .port_names = {
-               NULL,
-               "eth%d",
-               "eth%d",
-               "cpu",
-       },
-};
-static struct dsa_platform_data ksz8893m_switch_data = {
-       .nr_chips = 1,
-       .netdev = &bfin_mac_device.dev,
-       .chip = &ksz8893m_switch_chip_data,
-};
-
-static struct platform_device ksz8893m_switch_device = {
-       .name           = "dsa",
-       .id             = 0,
-       .num_resources  = 0,
-       .dev.platform_data = &ksz8893m_switch_data,
-};
-#endif
 #endif
 
 #if IS_ENABLED(CONFIG_MTD_M25P80)
@@ -228,19 +197,6 @@ static struct spi_board_info bfin_spi_board_info[] 
__initdata = {
        },
 #endif
 
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-       {
-               .modalias = "ksz8893m",
-               .max_speed_hz = 5000000,
-               .bus_num = 0,
-               .chip_select = 1,
-               .platform_data = NULL,
-               .mode = SPI_MODE_3,
-       },
-#endif
-#endif
-
 #if IS_ENABLED(CONFIG_MMC_SPI)
        {
                .modalias = "mmc_spi",
@@ -714,9 +670,6 @@ static struct platform_device *stamp_devices[] __initdata = 
{
 #if IS_ENABLED(CONFIG_BFIN_MAC)
        &bfin_mii_bus,
        &bfin_mac_device,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-       &ksz8893m_switch_device,
-#endif
 #endif
 
 #if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-- 
2.11.0