Hi Baruch,
On Wed, Aug 23, 2017 at 10:28:42AM +0300, Baruch Siach wrote:
> On Tue, Aug 22, 2017 at 07:08:30PM +0200, Antoine Tenart wrote:
> > This patch enables the two GE/SFP ports. They are configured in 10GKR
> > mode by default. To do this the cpm_xdmio is enabled as well, and two
> > phy descriptions are added.
> >
> > Signed-off-by: Antoine Tenart <antoine.ten...@free-electrons.com>
> > Tested-by: Marcin Wojtas <m...@semihalf.com>
> > ---
> > arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 30
> > +++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> > b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> > index abd39d1c1739..6cb4b000e1ac 100644
> > --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> > +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> > @@ -127,6 +127,30 @@
> > };
> > };
> >
> > +&cpm_xmdio {
> > + status = "okay";
> > +
> > + phy0: ethernet-phy@0 {
> > + compatible = "ethernet-phy-ieee802.3-c45";
> > + reg = <0>;
> > + };
> > +
> > + phy1: ethernet-phy@1 {
>
> Should be named 'ethernet-phy@8' to match the 'reg' property.That's right. Thanks! Antoine -- Antoine Ténart, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
