From: vishnuvardhan <vardhanraj4...@gmail.com>
As per the SAMA5D3 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports :
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: vishnuvardhan <vardhanraj4...@gmail.com>
[nicolas.fe...@microchip.com: modify slightly commit msg]
Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com>
---
drivers/net/ethernet/cadence/macb_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c
b/drivers/net/ethernet/cadence/macb_main.c
index e69ebdd65658..26d25749c3e4 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -3314,10 +3314,11 @@ static const struct macb_config sama5d2_config = {
static const struct macb_config sama5d3_config = {
.caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE
- | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
+ | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII | MACB_CAPS_JUMBO,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
.init = macb_init,
+ .jumbo_max_len = 10240,
};
static const struct macb_config sama5d4_config = {
--
2.9.0
