On 06/05/2017 04:23 AM, Russell King wrote: > Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). > This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only > supports Clause 45 accesses. > > The PHY appears (based on the vendor IDs) to be two different vendors > IP, with each devad containing several instances. > > This PHY driver has only been tested with the RJ45 copper port, fiber > port and a Marvell Armada 8040-based ethernet interface. > > It should be noted that to use the full range of speeds, MAC drivers > need to also reconfigure the link mode as per phydev->interface, since > the PHY automatically changes its interface mode depending on the > negotiated speed. > > Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com> -- Florian
