Qla3xxx only supports QLA4022 at this time. It will soon be patched to support QLA4032. There is no plan to add QLA4010 support.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Albert Lee > Sent: Wednesday, July 26, 2006 8:16 PM > To: Michael Tokarev > Cc: netdev@vger.kernel.org; Doug Maxey > Subject: Re: Is the qla3xxx driver in the mainline? > > Michael Tokarev wrote: > > Albert Lee wrote: > > [] > > > >>(I am curious to have some performance comparison of qla3xxx + open > >>iscsi v.s. qla4xxx + on board TOE/iscsi.) > > > > > > On wich card? I've been told that IPS4010 for example > isn't supported > > by qla3xxx. > > I've borrowed an ISP4022 based adapter, the qla3xxx should be > supported. > > > > > BTW, I found qla4xxx (on IPS4010) performs noticeable worse than > > open-iscsi stack on top of tigon (non-jumbo- > > frames-capable) GigE NIC (on an eserver xSeries 346 machine). > > > > Thanks for the info. With qla3xxx, we can actually use > the Ethernet interface of the qla4022 instead of the bcm57xx > tg3. So, we could compare the performance of the on-board > TOE/iscsi with open-iscsi better. > > -- > albert > > - > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html