Adding 8 bytes (sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN + 8
(EDSA_HLEN)) does not fix the error, because the interface keep
having a maximum length of 1518 bytes (sky2->netdev->mtu + ETH_HLEN
+ VLAN_HLEN).
Did you check the value being written to here:
/*
* The receiver hangs if it receives frames larger than the
* packet buffer. As a workaround, truncate oversize frames, but
* the register is limited to 9 bits, so if you do frames > 2052
* you better get the MTU right!
*/
thresh = sky2_get_rx_threshold(sky2);
if (thresh > 0x1ff)
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
RX_TRUNC_OFF);
else {
sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
RX_TRUNC_ON);
}
What is thresh?
The value of thresh is 380.
Rafa
Andrew
