From: Usha Ketineni <usha.k.ketin...@intel.com>

When DCB is enabled, add checks to ensure creation of number of VF's is
valid based on the traffic classes configured by the device.

Signed-off-by: Usha Ketineni <usha.k.ketin...@intel.com>
Tested-by: Ronald Bynoe <ronald.j.by...@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirs...@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 26 +++++++++++++++++++++++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h |  3 +++
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c 
b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 044cb44747cf..39e109da9bd9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -298,6 +298,7 @@ static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int 
num_vfs)
 #ifdef CONFIG_PCI_IOV
        struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
        int err = 0;
+       u8 num_tc;
        int i;
        int pre_existing_vfs = pci_num_vf(dev);
 
@@ -310,16 +311,35 @@ static int ixgbe_pci_sriov_enable(struct pci_dev *dev, 
int num_vfs)
                return err;
 
        /* While the SR-IOV capability structure reports total VFs to be 64,
-        * we have to limit the actual number allocated based on two factors.
+        * we limit the actual number allocated as below based on two factors.
+        *    Num_TCs   MAX_VFs
+        *      1         63
+        *      <=4       31
+        *      >4        15
         * First, we reserve some transmit/receive resources for the PF.
         * Second, VMDQ also uses the same pools that SR-IOV does. We need to
         * account for this, so that we don't accidentally allocate more VFs
         * than we have available pools. The PCI bus driver already checks for
         * other values out of range.
         */
-       if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VF_FUNCTIONS)
-               return -EPERM;
+       num_tc = netdev_get_num_tc(adapter->netdev);
 
+       if (num_tc > 4) {
+               if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VFS_8TC) {
+                       e_dev_err("Currently the device is configured with %d 
TCs, Creating more than %d VFs is not allowed\n", num_tc, IXGBE_MAX_VFS_8TC);
+                       return -EPERM;
+               }
+       } else if ((num_tc > 1) && (num_tc <= 4)) {
+               if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VFS_4TC) {
+                       e_dev_err("Currently the device is configured with %d 
TCs, Creating more than %d VFs is not allowed\n", num_tc, IXGBE_MAX_VFS_4TC);
+                       return -EPERM;
+               }
+       } else {
+               if ((num_vfs + adapter->num_rx_pools) > IXGBE_MAX_VFS_1TC) {
+                       e_dev_err("Currently the device is configured with %d 
TCs, Creating more than %d VFs is not allowed\n", num_tc, IXGBE_MAX_VFS_1TC);
+                       return -EPERM;
+               }
+       }
        adapter->num_vfs = num_vfs;
 
        err = __ixgbe_enable_sriov(adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h 
b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 0c7977d27b71..3166fd164e51 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -33,6 +33,9 @@
  *  63 (IXGBE_MAX_VF_FUNCTIONS - 1)
  */
 #define IXGBE_MAX_VFS_DRV_LIMIT  (IXGBE_MAX_VF_FUNCTIONS - 1)
+#define IXGBE_MAX_VFS_1TC              IXGBE_MAX_VF_FUNCTIONS
+#define IXGBE_MAX_VFS_4TC              32
+#define IXGBE_MAX_VFS_8TC              16
 
 #ifdef CONFIG_PCI_IOV
 void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter);
-- 
2.12.2

Reply via email to