On Mon, Apr 03, 2017 at 01:19:54PM +0200, Maxime Ripard wrote:
> On Mon, Apr 03, 2017 at 11:14:28AM +0200, Corentin Labbe wrote:
> > Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
> > ---
> > .../devicetree/bindings/misc/allwinner,syscon.txt | 19
> > +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> >
> > diff --git a/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> > b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> > new file mode 100644
> > index 0000000..9f5f1f5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> > @@ -0,0 +1,19 @@
> > +* Allwinner sun8i system controller
> > +
> > +This file describes the bindings for the system controller present in
> > +Allwinner SoC H3, A83T and A64.
> > +The principal function of this syscon is to control EMAC PHY choice and
> > +config.
> > +
> > +Required properties for the system controller:
> > +- reg: address and length of the register for the device.
> > +- compatible: should be "syscon" and one of the following string:
> > + "allwinner,sun8i-h3-system-controller"
> > + "allwinner,sun8i-a64-system-controller"
> > + "allwinner,sun8i-a83t-system-controller"
> > +
> > +Example:
> > +syscon: syscon@01c00000 {
> > + compatible = "syscon", "allwinner,sun8i-h3-system-controller";
>
> The syntax is the more specific first, so your compatibles should be
> the other way around.
>
Changed it everywhere, and forgot to do it here
I will change it
Thanks
Regards
