David, This series of patches depends on the previous set of changes, and is therefore net-next material.
While testing the EEE code, I discovered a number of issues: 1. It is possible to enable advertisment of EEE modes which are not supported by the hardware. We omit to check the supported modes and mask off those modes that are not supported before writing the EEE advertisment register. 2. We need to restart autonegotiation after a change of the EEE advertisment, otherwise the link partner does not see the updated EEE modes. 3. SGMII connected PHYs are also capable of supporting EEE. Through discussion with Florian, it has been decided to remove the check for the PHY interface mode in patch (3). drivers/net/phy/phy.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) v2: fix "phy_restart_aneg" build error identified by 0-day v3: drop RFC tag, replace 3rd patch -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.
