[PATCH] net: phy: handle state correctly in phy_stop_machine

[Zach Brown]

From: Nathan Sullivan <nathan.sulli...@ni.com>

If the PHY is halted on stop, then do not set the state to PHY_UP.  This
ensures the phy will be restarted later in phy_start when the machine is
started again.

Signed-off-by: Nathan Sullivan <nathan.sulli...@ni.com>
Signed-off-by: Brad Mouring <brad.mour...@ni.com>
Acked-by: Xander Huff <xander.h...@ni.com>
Acked-by: Kyle Roeschley <kyle.roesch...@ni.com>
---
 drivers/net/phy/phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7cc1b7d..fe2d4c4 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -678,7 +678,7 @@ void phy_stop_machine(struct phy_device *phydev)
        cancel_delayed_work_sync(&phydev->state_queue);
 
        mutex_lock(&phydev->lock);
-       if (phydev->state > PHY_UP)
+       if (phydev->state > PHY_UP && phydev->state != PHY_HALTED)
                phydev->state = PHY_UP;
        mutex_unlock(&phydev->lock);
 }
-- 
2.7.4