When the aquantia device mtu is changed the net_device structure is not
updated. As a result the ip command does not properly reflect the mtu change.
Commit 5513e16421cb incorrectly assumed that __dev_set_mtu() was making the
assignment ndev->mtu = new_mtu; This is not true in the case where the driver
has a ndo_change_mtu routine.
Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu")
v2: no longer close/open net-device after mtu change
Cc: Pavel Belous <[email protected]>
Signed-off-by: David Arcari <[email protected]>
---
drivers/net/ethernet/aquantia/atlantic/aq_main.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index dad6362..bba5ebd 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -96,15 +96,9 @@ static int aq_ndev_change_mtu(struct net_device *ndev, int
new_mtu)
struct aq_nic_s *aq_nic = netdev_priv(ndev);
int err = aq_nic_set_mtu(aq_nic, new_mtu + ETH_HLEN);
- if (err < 0)
- goto err_exit;
+ if (!err)
+ ndev->mtu = new_mtu;
- if (netif_running(ndev)) {
- aq_ndev_close(ndev);
- aq_ndev_open(ndev);
- }
-
-err_exit:
return err;
}
--
1.8.3.1
