This patch series addresses some issues in the AMD XGBE driver.
The following fixes are included in this driver update series:
- Stop the PHY before disabling and releasing device interrupts so that
MDIO requests issued by the device can be properly handled
- Set the MDIO communication mode on device startup, not just device
probe
- Do not overwrite SFP settings when mod_absent is detected
This patch series is based on net.
---
Tom Lendacky (3):
amd-xgbe: Stop the PHY before releasing interrupts
amd-xgbe: Be sure to set MDIO modes on device (re)start
amd-xgbe: Don't overwrite SFP PHY mod_absent settings
drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 4 ++--
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 24 ++++++++++++++++++++++++
3 files changed, 27 insertions(+), 3 deletions(-)
--
Tom Lendacky
