On 02/10/2017 12:05 PM, Arnd Bergmann wrote:
> On Friday, February 10, 2017 9:42:21 AM CET Florian Fainelli wrote:
>> On 02/10/2017 12:20 AM, Arnd Bergmann wrote:
>>> On Thu, Feb 9, 2017 at 7:22 PM, Florian Fainelli <f.faine...@gmail.com>
>>> wrote:
>>>> On 02/09/2017 07:08 AM, Arnd Bergmann wrote:
>>>> I disabled CONFIG_NETDEVICES to force CONFIG_PHY not to be set here, and
>>>> I was not able to reproduce this, what am I missing?
>>>
>>> In the ARMv5 allmodconfig build, this fails because CONFIG_PHY=m, and
>>> we can't call into it. You could use IS_BUILTIN instead of IS_ENABLED in
>>> the header as a oneline workaround, but I think that would be more confusing
>>> to real users that try to use CONFIG_PHY=m without realizing why they lose
>>> access to their switch.
>>
>> I see, this patch should also help fixing this:
>>
>> http://patchwork.ozlabs.org/patch/726381/
>
> I think you still have the same problem, as you can still have the
> boardinfo registration in a loadable module.
The patch exports mdiobus_register_board_info() so that should solve
your problem here, and I did verify this with a loadable module that
references mdiobus_register_board_info() in that case.
>
> I have come up with a patch too now and done some randconfig testing
> on it (it took me several tries as well), please see below. It does
> some of the same things as yours and some others.
>
> The main trick is to have a separate 'MDIO_BOARDINFO' Kconfig symbol
> that can be selected regardless of all the other symbols, and that
> will lead to the registration being either built-in when it's needed
> or not built at all when either no board calls it, or PHYLIB is
> disabled.
Your patch is fine in premise except that you are making CONFIG_MDIO
encompass both drivers/net/mdio.c and
drivers/net/phy/mdio_{bus,device}.c and these do share the same header
(for better or for worse), but are not quite dealing with MDIO at the
same level. drivers/net/mdio.c is more like PHYLIB for the old-style,
pre mdiobus() drivers helper functions.
I like it that you made MDIO_BOARDINFO separate, and that is probably a
patch I should incorporate in the other patch splitting things up, see
below though for the remainder of the changes.
>
> From f35e89cacfabdf7b822772013389132605941def Mon Sep 17 00:00:00 2001
> From: Arnd Bergmann <a...@arndb.de>
> Date: Wed, 27 Apr 2016 11:51:18 +0200
> Subject: [PATCH] [RFC] move ethernet PHY config into drivers/phy/Kconfig
>
> Calling mdiobus_register_board_info from builtin code with CONFIG_PHYLIB=m
> currently results in a link error:
>
> arch/arm/plat-orion/common.o: In function `orion_ge00_switch_init':
> common.c:(.init.text+0x6a4): undefined reference to
> `mdiobus_register_board_info'
>
> As the long-term strategy is to separate mdio from phylib, and to get
> generic-phy
> and (networking-only) phylib closer together, this performs a first step in
> that
> direction: The Kconfig file for phylib gets logically pulled under the PHY
> driver configuration and becomes independent from networking. This lets us
> select the new CONFIG_MDIO_BOARDINFO from platforms that need it, and provide
> the functions exactly when we need them.
This is too broad, the only part that is worth in drivers/net/phy/ of
pulling out of drivers/net/phy/ is what I tried to extract: mdio bus and
device. There are some bad inter-dependencies between that code and
phy_device.c and phy.c which makes it hard to split and make that part
completely standalone for now.
The only part that is truly valuable to non-Ethernet PHY devices is the
MDIO bus/device registration part, which is available in my patch with
CONFIG_MDIO_DEVICE, and which probably should not depend from
NETDEVICES, so the other part of your patch makes sense too here.
Thanks!
>
> In the same step, we can also split out the MDIO driver configuration from
> phylib. This is based on an older experimental patch I had, but it still
> requires some code changes in phylib itself to let users actually rely on
> MDIO without all of PHYLIB.
>
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
>
> diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
> index 468b8cb7fd5f..e1126e1aa3d2 100644
> --- a/arch/arm/mach-orion5x/Kconfig
> +++ b/arch/arm/mach-orion5x/Kconfig
> @@ -4,6 +4,7 @@ menuconfig ARCH_ORION5X
> select CPU_FEROCEON
> select GENERIC_CLOCKEVENTS
> select GPIOLIB
> + select MDIO_BOARDINFO
> select MVEBU_MBUS
> select PCI
> select PLAT_ORION_LEGACY
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index a993cbeb9e0c..9eb15b7518bd 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -378,8 +378,6 @@ config NET_SB1000
>
> If you don't have this card, of course say N.
>
> -source "drivers/net/phy/Kconfig"
> -
> source "drivers/net/plip/Kconfig"
>
> source "drivers/net/ppp/Kconfig"
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 7336cbd3ef5d..3ab87e9f9442 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -17,7 +17,7 @@ obj-$(CONFIG_MII) += mii.o
> obj-$(CONFIG_MDIO) += mdio.o
> obj-$(CONFIG_NET) += Space.o loopback.o
> obj-$(CONFIG_NETCONSOLE) += netconsole.o
> -obj-$(CONFIG_PHYLIB) += phy/
> +obj-y+= phy/
> obj-$(CONFIG_RIONET) += rionet.o
> obj-$(CONFIG_NET_TEAM) += team/
> obj-$(CONFIG_TUN) += tun.o
> diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
> index 8c08f9deef92..9c4652ae2750 100644
> --- a/drivers/net/ethernet/Kconfig
> +++ b/drivers/net/ethernet/Kconfig
> @@ -11,9 +11,6 @@ menuconfig ETHERNET
>
> if ETHERNET
>
> -config MDIO
> - tristate
> -
> config SUNGEM_PHY
> tristate
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 8dbd59baa34d..37f5552cc5b3 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -3,8 +3,9 @@
> #
>
> menuconfig PHYLIB
> - tristate "PHY Device support and infrastructure"
> + tristate "Ethernet PHY Device support and infrastructure"
> depends on NETDEVICES
> + select MDIO
> help
> Ethernet controllers are usually attached to PHY
> devices. This option provides infrastructure for
> @@ -248,6 +249,16 @@ config FIXED_PHY
> PHYs that are not connected to the real MDIO bus.
>
> Currently tested with mpc866ads and mpc8349e-mitx.
> +endif # PHYLIB
> +
> +config MDIO
> + tristate
> + help
> + The MDIO bus is typically used ethernet PHYs, but can also be
> + used by other PHY drivers.
> +
> +menu "MDIO bus drivers"
> + depends on MDIO
>
> config ICPLUS_PHY
> tristate "ICPlus PHYs"
> @@ -340,7 +351,10 @@ config XILINX_GMII2RGMII
> the Reduced Gigabit Media Independent Interface(RGMII) between
> Ethernet physical media devices and the Gigabit Ethernet controller.
>
> -endif # PHYLIB
> +endmenu # MDIO
> +
> +config MDIO_BOARDINFO
> + bool
>
> config MICREL_KS8995MA
> tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index 407b0b601ea8..e60e5d2fae53 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -1,11 +1,13 @@
> # Makefile for Linux PHY drivers and MDIO bus drivers
>
> -libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o \
> - mdio-boardinfo.o
> +libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
> libphy-$(CONFIG_SWPHY) += swphy.o
> libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
>
> obj-$(CONFIG_PHYLIB) += libphy.o
> +ifdef CONFIG_PHYLIB
> +obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
> +endif
>
> obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
> obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
> diff --git a/drivers/net/phy/mdio-boardinfo.c
> b/drivers/net/phy/mdio-boardinfo.c
> index 6b988f77da08..f7cf98093344 100644
> --- a/drivers/net/phy/mdio-boardinfo.c
> +++ b/drivers/net/phy/mdio-boardinfo.c
> @@ -55,6 +55,7 @@ void mdiobus_setup_mdiodev_from_board_info(struct mii_bus
> *bus)
> }
> mutex_unlock(&mdio_board_lock);
> }
> +EXPORT_SYMBOL_GPL(mdiobus_setup_mdiodev_from_board_info);
>
> /**
> * mdio_register_board_info - register MDIO devices for a given board
> diff --git a/drivers/net/phy/mdio-boardinfo.h
> b/drivers/net/phy/mdio-boardinfo.h
> index 00f98163e90e..3a72bd978114 100644
> --- a/drivers/net/phy/mdio-boardinfo.h
> +++ b/drivers/net/phy/mdio-boardinfo.h
> @@ -14,6 +14,12 @@ struct mdio_board_entry {
> struct mdio_board_info board_info;
> };
>
> +#ifdef CONFIG_MDIO_BOARDINFO
> void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus);
> +#else
> +static inline void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus)
> +{
> +}
> +#endif
>
> #endif /* __MDIO_BOARD_INFO_H */
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 519241bc8817..87c581f11297 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -2,7 +2,9 @@
> # PHY
> #
>
> -menu "PHY Subsystem"
> +menu "PHY drivers"
> +
> +menu "Generic PHY subsystem"
>
> config GENERIC_PHY
> bool "PHY Core"
> @@ -515,3 +517,7 @@ config PHY_NSP_USB3
> Enable this to support the Broadcom Northstar plus USB3 PHY.
> If unsure, say N.
> endmenu
> +
> +source "drivers/net/phy/Kconfig"
> +
> +endmenu
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index d9bdf53e0514..2ec82a4c3b8f 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -893,7 +893,7 @@ struct mdio_board_info {
> const void *platform_data;
> };
>
> -#if IS_ENABLED(CONFIG_PHYLIB)
> +#if IS_ENABLED(CONFIG_PHYLIB) && IS_ENABLED(CONFIG_MDIO_BOARDINFO)
> int mdiobus_register_board_info(const struct mdio_board_info *info,
> unsigned int n);
> #else
>
--
Florian
