From: Christian Lamparter <chunk...@gmail.com>
This patch adds glue-code that allows the EMAC driver to interface
with the existing dt-supported PHYs in drivers/net/phy.
Because currently, the emac driver maintains a small library of
supported phys for in a private phy.c file located in the drivers
directory.
The support is limited to mostly single ethernet transceiver like the:
CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035.
However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W)
have a 5-port switch (QCA8327N) attached to the MDIO of the EMAC.
The switch chip has already a proper phy-driver (qca8k) that uses
the generic phy library.
Signed-off-by: Christian Lamparter <chunk...@googlemail.com>
---
drivers/net/ethernet/ibm/emac/core.c | 188 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/ibm/emac/core.h | 4 +
2 files changed, 192 insertions(+)
diff --git a/drivers/net/ethernet/ibm/emac/core.c
b/drivers/net/ethernet/ibm/emac/core.c
index 6ead2335a169..ea9234cdb227 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -42,6 +42,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_net.h>
+#include <linux/of_mdio.h>
#include <linux/slab.h>
#include <asm/processor.h>
@@ -2420,6 +2421,179 @@ static int emac_read_uint_prop(struct device_node *np,
const char *name,
return 0;
}
+static void emac_adjust_link(struct net_device *ndev)
+{
+ struct emac_instance *dev = netdev_priv(ndev);
+ struct phy_device *phy = dev->phy_dev;
+
+ mutex_lock(&dev->link_lock);
+ dev->phy.autoneg = phy->autoneg;
+ dev->phy.speed = phy->speed;
+ dev->phy.duplex = phy->duplex;
+ dev->phy.pause = phy->pause;
+ dev->phy.asym_pause = phy->asym_pause;
+ dev->phy.advertising = phy->advertising;
+ mutex_unlock(&dev->link_lock);
+}
+
+static int emac_mii_bus_read(struct mii_bus *bus, int addr, int regnum)
+{
+ return emac_mdio_read(bus->priv, addr, regnum);
+}
+
+static int emac_mii_bus_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ emac_mdio_write(bus->priv, addr, regnum, val);
+ return 0;
+}
+
+static int emac_mii_bus_reset(struct mii_bus *bus)
+{
+ struct emac_instance *dev = netdev_priv(bus->priv);
+
+ emac_mii_reset_phy(&dev->phy);
+ return 0;
+}
+
+static int emac_mdio_probe(struct emac_instance *dev)
+{
+ struct device_node *mii_np;
+ struct mii_bus *bus;
+ int res;
+
+ bus = mdiobus_alloc();
+ if (!bus)
+ return -ENOMEM;
+
+ mii_np = of_get_child_by_name(dev->ofdev->dev.of_node, "mdio");
+ if (!mii_np) {
+ dev_err(&dev->ndev->dev, "no mdio definition found.");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(mii_np))
+ return 0;
+
+ bus->priv = dev->ndev;
+ bus->parent = dev->ndev->dev.parent;
+ bus->name = "emac_mdio";
+ bus->read = &emac_mii_bus_read;
+ bus->write = &emac_mii_bus_write;
+ bus->reset = &emac_mii_bus_reset;
+
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", bus->name);
+
+ res = of_mdiobus_register(bus, mii_np);
+ if (res) {
+ dev_err(&dev->ndev->dev, "cannot register MDIO bus %s\n",
+ bus->name);
+ mdiobus_free(bus);
+ }
+
+ dev->mii_bus = bus;
+ return res;
+}
+
+static void emac_mdio_cleanup(struct emac_instance *dev)
+{
+ if (dev->mii_bus) {
+ if (dev->mii_bus->state == MDIOBUS_REGISTERED)
+ mdiobus_unregister(dev->mii_bus);
+ mdiobus_free(dev->mii_bus);
+ dev->mii_bus = NULL;
+ kfree(dev->phy.def);
+ }
+}
+
+static int stub_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ return 0;
+}
+
+static int stub_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ return 0;
+}
+
+static int stub_poll_link(struct mii_phy *phy)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+
+ return dev->opened;
+}
+
+static int stub_read_link(struct mii_phy *phy)
+{
+ struct net_device *ndev = phy->dev;
+ struct emac_instance *dev = netdev_priv(ndev);
+
+ phy_start(dev->phy_dev);
+ return 0;
+}
+
+static const struct mii_phy_ops emac_stub_phy_ops = {
+ .setup_aneg = stub_setup_aneg,
+ .setup_forced = stub_setup_forced,
+ .poll_link = stub_poll_link,
+ .read_link = stub_read_link,
+};
+
+static int emac_probe_dt_phy(struct emac_instance *dev)
+{
+ struct device_node *np = dev->ofdev->dev.of_node;
+ struct device_node *phy_handle;
+ struct net_device *ndev = dev->ndev;
+ int res;
+
+ phy_handle = of_parse_phandle(np, "phy-handle", 0);
+
+ if (phy_handle) {
+ res = emac_mdio_probe(dev);
+ if (res)
+ goto err_cleanup;
+
+ dev->phy.def = kzalloc(sizeof(*dev->phy.def), GFP_KERNEL);
+ if (!dev->phy.def) {
+ res = -ENOMEM;
+ goto err_cleanup;
+ }
+
+ dev->phy_dev = of_phy_connect(ndev, phy_handle,
+ &emac_adjust_link, 0,
+ PHY_INTERFACE_MODE_RGMII);
+ if (!dev->phy_dev) {
+ res = -ENODEV;
+ goto err_cleanup;
+ }
+
+ of_node_put(phy_handle);
+ dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
+ dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
+ dev->phy.def->name = dev->phy_dev->drv->name;
+ dev->phy.def->ops = &emac_stub_phy_ops;
+ /* Disable any PHY features not supported by the platform */
+ dev->phy.def->features = dev->phy_dev->drv->features &
+ ~dev->phy_feat_exc;
+ dev->phy.features = dev->phy.def->features;
+ dev->phy.address = dev->phy_dev->mdio.addr;
+ dev->phy.mode = dev->phy_dev->interface;
+ return 0;
+ }
+
+ /* if the device tree didn't specifiy the the phy, then
+ * we simply fallback to the old emac_phy.c probe code
+ * for compatibility reasons.
+ */
+ return 1;
+
+ err_cleanup:
+ of_node_put(phy_handle);
+ kfree(dev->phy.def);
+ return res;
+}
+
static int emac_init_phy(struct emac_instance *dev)
{
struct device_node *np = dev->ofdev->dev.of_node;
@@ -2490,6 +2664,13 @@ static int emac_init_phy(struct emac_instance *dev)
emac_configure(dev);
+ if (emac_has_feature(dev, EMAC_FTR_HAS_RGMII)) {
+ int res = emac_probe_dt_phy(dev);
+
+ if (res <= 0)
+ return res;
+ }
+
if (dev->phy_address != 0xffffffff)
phy_map = ~(1 << dev->phy_address);
@@ -2938,6 +3119,8 @@ static int emac_probe(struct platform_device *ofdev)
/* I have a bad feeling about this ... */
err_detach_tah:
+ emac_mdio_cleanup(dev);
+
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
tah_detach(dev->tah_dev, dev->tah_port);
err_detach_rgmii:
@@ -2988,6 +3171,11 @@ static int emac_remove(struct platform_device *ofdev)
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
zmii_detach(dev->zmii_dev, dev->zmii_port);
+ if (dev->phy_dev)
+ phy_disconnect(dev->phy_dev);
+
+ emac_mdio_cleanup(dev);
+
busy_phy_map &= ~(1 << dev->phy.address);
DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
diff --git a/drivers/net/ethernet/ibm/emac/core.h
b/drivers/net/ethernet/ibm/emac/core.h
index 93ae11494810..0710a6685489 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -199,6 +199,10 @@ struct emac_instance {
struct emac_instance *mdio_instance;
struct mutex mdio_lock;
+ /* Device-tree based phy configuration */
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+
/* ZMII infos if any */
u32 zmii_ph;
u32 zmii_port;
--
2.11.0
