Hi all,
This patch series adds support for the Broadcom Compact Field Processor (CFP)
which is a classification and matching engine built into most Broadcom switches.
We support that using ethtool::rxnfc because it allows all known uses cases from
the users I support to work, and more importantly, it allows the selection of a
target rule index, which is later used by e.g: offloading hardware, this is an
essential feature that I could not find being supported with cls_* for instance.
Thanks!
Changes in v2:
- fixed modular builds reported by kbuild test robot
Florian Fainelli (4):
net: dsa: Hook {get,set}_rxnfc ethtool operations
net: dsa: bcm_sf2: Configure traffic classes to queue mapping
net: dsa: bcm_sf2: Add CFP registers definitions
net: dsa: bcm_sf2: Add support for ethtool::rxnfc
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/bcm_sf2.c | 23 ++
drivers/net/dsa/bcm_sf2.h | 17 ++
drivers/net/dsa/bcm_sf2_cfp.c | 613 +++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/bcm_sf2_regs.h | 150 ++++++++++
include/net/dsa.h | 8 +
net/dsa/slave.c | 26 ++
7 files changed, 838 insertions(+)
create mode 100644 drivers/net/dsa/bcm_sf2_cfp.c
--
2.9.3
