Hi all,
This patch series adds support for port mirroring in the two
Broadcom switch drivers. The major part of the functional are actually with
the plumbing between tc and the drivers.
David, this will most likely conflict a little bit with my other series:
net: dsa: bcm_sf2: CFP support, so just let me know if that happens, and
I will provide a rebased version. Thanks!
Tested using the two iproute2 examples:
# ingress
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff: \
matchall skip_sw \
action mirred egress mirror \
dev eth2
# egress
tc qdisc add dev eth1 handle 1: root prio
tc filter add dev eth1 parent 1: \
matchall skip_sw \
action mirred egress mirror \
dev eth2
Florian Fainelli (4):
net: dsa: Add plumbing for port mirroring
net: dsa: b53: Add mirror capture register definitions
net: dsa: b53: Add support for port mirroring
net: dsa: bcm_sf2: Add support for port mirroring
drivers/net/dsa/b53/b53_common.c | 54 +++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 4 ++
drivers/net/dsa/b53/b53_regs.h | 32 +++++++++
drivers/net/dsa/bcm_sf2.c | 2 +
include/net/dsa.h | 41 +++++++++++
net/dsa/dsa_priv.h | 3 +
net/dsa/slave.c | 143 ++++++++++++++++++++++++++++++++++++++-
7 files changed, 278 insertions(+), 1 deletion(-)
--
2.9.3
