My e-mail client went bogus, please ignore 2 past e-mails. Very sorry. Best Regards, Joao Pinto
Às 3:57 PM de 1/20/2017, Joao Pinto escreveu: > This patch adds more info to stmicro' Kconfig files in order to be clearer > that the driver can be used by ethernet cards based on 10/100/1000/EQOS > Synopsys IP Cores. > > EQOS was also added stmmac/Kconfig Kconfig, since dwmac4 is in fact EQoS, > one of Synopsys Ethernet IPs. More info at: > https://www.synopsys.com/dw/ipdir.php?ds=dwc_ether_qos > > Signed-off-by: Joao Pinto <jpi...@synopsys.com> > --- > drivers/net/ethernet/stmicro/Kconfig | 3 ++- > drivers/net/ethernet/stmicro/stmmac/Kconfig | 15 +++++++-------- > 2 files changed, 9 insertions(+), 9 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/Kconfig > b/drivers/net/ethernet/stmicro/Kconfig > index 1c1157d..ecd7a5e 100644 > --- a/drivers/net/ethernet/stmicro/Kconfig > +++ b/drivers/net/ethernet/stmicro/Kconfig > @@ -7,7 +7,8 @@ config NET_VENDOR_STMICRO > default y > depends on HAS_IOMEM > ---help--- > - If you have a network (Ethernet) card belonging to this class, say Y. > + If you have a network (Ethernet) card based on Synopsys Ethernet IP > + Cores, say Y. > > Note that the answer to this question doesn't directly affect the > kernel: saying N will just cause the configurator to skip all > diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig > b/drivers/net/ethernet/stmicro/stmmac/Kconfig > index 99594e3..cfbe363 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig > +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig > @@ -1,5 +1,5 @@ > config STMMAC_ETH > - tristate "STMicroelectronics 10/100/1000 Ethernet driver" > + tristate "STMicroelectronics 10/100/1000/EQOS Ethernet driver" > depends on HAS_IOMEM && HAS_DMA > select MII > select PHYLIB > @@ -7,9 +7,8 @@ config STMMAC_ETH > imply PTP_1588_CLOCK > select RESET_CONTROLLER > ---help--- > - This is the driver for the Ethernet IPs are built around a > - Synopsys IP Core and only tested on the STMicroelectronics > - platforms. > + This is the driver for the Ethernet IPs built around a > + Synopsys IP Core. > > if STMMAC_ETH > > @@ -152,11 +151,11 @@ config STMMAC_PCI > tristate "STMMAC PCI bus support" > depends on STMMAC_ETH && PCI > ---help--- > - This is to select the Synopsys DWMAC available on PCI devices, > - if you have a controller with this interface, say Y or M here. > + This selects the platform specific bus support for the stmmac driver. > + This driver was tested on XLINX XC2V3000 FF1152AMT0221 > + D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. > > - This PCI support is tested on XLINX XC2V3000 FF1152AMT0221 > - D1215994A VIRTEX FPGA board. > + If you have a controller with this interface, say Y or M here. > > If unsure, say N. > endif >
