From: Elad Raz <[email protected]>
The event_data starts from address 0x00-0x0C and not from 0x08-0x014. This
leads to duplication with other fields in the Event Queue Element such as
sub-type, cqn and owner.
Fixes: eda6500a987a0 ("mlxsw: Add PCI bus implementation")
Signed-off-by: Elad Raz <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
index d147ddd..0af3338 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -209,21 +209,21 @@ MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
/* pci_eqe_cmd_token
* Command completion event - token
*/
-MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
+MLXSW_ITEM32(pci, eqe, cmd_token, 0x00, 16, 16);
/* pci_eqe_cmd_status
* Command completion event - status
*/
-MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
+MLXSW_ITEM32(pci, eqe, cmd_status, 0x00, 0, 8);
/* pci_eqe_cmd_out_param_h
* Command completion event - output parameter - higher part
*/
-MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
+MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x04, 0, 32);
/* pci_eqe_cmd_out_param_l
* Command completion event - output parameter - lower part
*/
-MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
+MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x08, 0, 32);
#endif
--
2.7.4
