Hi Joao,
On 2017/1/10 22:52, Joao Pinto wrote: > This patch renames stmicro/stmmac to synopsys/ since it is a standard > ethernet software package regarding synopsys ethernet controllers, supporting > the majority of Synopsys Ethernet IPs. The config IDs remain the same, for > retro-compatibility, only the description was changed. > > Signed-off-by: Joao Pinto <jpi...@synopsys.com> > --- > changes v1->v2: > - nothing changed. Just to keep up with patch set version > > @@ -1,5 +1,5 @@ > config STMMAC_ETH > - tristate "STMicroelectronics 10/100/1000 Ethernet driver" > + tristate "Synopsys Ethernet drivers" > depends on HAS_IOMEM && HAS_DMA > select MII > select PHYLIB > @@ -14,7 +14,7 @@ config STMMAC_ETH > if STMMAC_ETH > "Synopsys Ethernet drivers" is too generic. The name should reflect the controller. This driver is for Synopsys GMAC 10M/100M/1G IPs. We will submit a driver for the new 25G/40G/50G/100G XLGMAC IP in the future. > config STMMAC_PLATFORM > - tristate "STMMAC Platform bus support" > + tristate "Platform bus support" > depends on STMMAC_ETH > select MFD_SYSCON > default y > @@ -149,13 +149,13 @@ config DWMAC_SUNXI > endif > > config STMMAC_PCI > - tristate "STMMAC PCI bus support" > + tristate "PCI bus support" > depends on STMMAC_ETH && PCI > ---help--- > This is to select the Synopsys DWMAC available on PCI devices, > if you have a controller with this interface, say Y or M here. > > - This PCI support is tested on XLINX XC2V3000 FF1152AMT0221 > + This PCI support was tested on XLINX XC2V3000 FF1152AMT0221 > D1215994A VIRTEX FPGA board. The name is also too generic. Please try to reflect the controller. Thanks, Jie
