On 01/06/2017 03:54 PM, Tony Lindgren wrote:
* Grygorii Strashko <grygorii.stras...@ti.com> [170106 12:56]:
TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ
generation in case of phy/link status changes. The INT/PWDN lines from both
DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT.
Hmm not seeing the patch 1/2 here.. Can this one be queued separately?
Is it for v4.11 or a fix?
This is for next (v4.11) and there is just a mistake in subj, Sry.
Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
---
arch/arm/boot/dts/dra72-evm-revc.dts | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts
b/arch/arm/boot/dts/dra72-evm-revc.dts
index c3d939c..3ecac56 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -68,6 +68,8 @@
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
dp83867_1: ethernet-phy@3 {
@@ -75,6 +77,8 @@
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,min-output-imepdance;
+ ti,min-output-impedance;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
};
--
2.10.1.dirty
--
regards,
-grygorii
