[next PATCH 06/11] ixgbe: Use length to determine if descriptor is done

[Alexander Duyck]

From: Alexander Duyck <alexander.h.du...@intel.com>

This change makes it so that we use the length of the packet instead of the
DD status bit to determine if a new descriptor is ready to be processed.
The obvious advantage is that it cuts down on reads as we don't really even
need the DD bit if going from a 0 to a non-zero value on size is enough to
inform us that the packet has been completed.

Signed-off-by: Alexander Duyck <alexander.h.du...@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c 
b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1b6f1f584044..6ce596816954 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1653,8 +1653,8 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, 
u16 cleaned_count)
                        i -= rx_ring->count;
                }
 
-               /* clear the status bits for the next_to_use descriptor */
-               rx_desc->wb.upper.status_error = 0;
+               /* clear the length for the next_to_use descriptor */
+               rx_desc->wb.upper.length = 0;
 
                cleaned_count--;
        } while (cleaned_count);
@@ -2170,7 +2170,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector 
*q_vector,
 
                rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean);
 
-               if (!rx_desc->wb.upper.status_error)
+               if (!rx_desc->wb.upper.length)
                        break;
 
                /* This memory barrier is needed to keep us from reading
@@ -3749,6 +3749,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter 
*adapter,
                             struct ixgbe_ring *ring)
 {
        struct ixgbe_hw *hw = &adapter->hw;
+       union ixgbe_adv_rx_desc *rx_desc;
        u64 rdba = ring->dma;
        u32 rxdctl;
        u8 reg_idx = ring->reg_idx;
@@ -3783,6 +3784,10 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter 
*adapter,
                rxdctl |=  0x080420;
        }
 
+       /* initialize Rx descriptor 0 */
+       rx_desc = IXGBE_RX_DESC(ring, 0);
+       rx_desc->wb.upper.length = 0;
+
        /* enable receive descriptor ring */
        rxdctl |= IXGBE_RXDCTL_ENABLE;
        IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
@@ -4998,9 +5003,6 @@ static void ixgbe_clean_rx_ring(struct ixgbe_ring 
*rx_ring)
        size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
        memset(rx_ring->rx_buffer_info, 0, size);
 
-       /* Zero out the descriptor ring */
-       memset(rx_ring->desc, 0, rx_ring->size);
-
        rx_ring->next_to_alloc = 0;
        rx_ring->next_to_clean = 0;
        rx_ring->next_to_use = 0;