Hi Niklas,
Às 2:43 PM de 12/20/2016, Niklas Cassel escreveu:
>
>
> On 12/20/2016 01:55 PM, Joao Pinto wrote:
>> When the hardware is synthesized with multiple queues, all queues are
>> disabled for default. This patch adds the rx queues configuration.
>> This patch was successfully tested in a Synopsys QoS Reference design.
>>
>> Signed-off-by: Joao Pinto <jpi...@synopsys.com>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/common.h | 2 ++
>> drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 4 ++++
>> drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 11 +++++++++++
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 21 +++++++++++++++++++++
>> 4 files changed, 38 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h
>> b/drivers/net/ethernet/stmicro/stmmac/common.h
>> index b13a144..61bab50 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>> @@ -454,6 +454,8 @@ struct stmmac_ops {
>> void (*core_init)(struct mac_device_info *hw, int mtu);
>> /* Enable and verify that the IPC module is supported */
>> int (*rx_ipc)(struct mac_device_info *hw);
>> + /* Enable RX Queues */
>> + void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
>> /* Dump MAC registers */
>> void (*dump_regs)(struct mac_device_info *hw);
>> /* Handle extra events on specific interrupts hw dependent */
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> index 3e8d4fe..fd013bd 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
>> @@ -22,6 +22,7 @@
>> #define GMAC_HASH_TAB_32_63 0x00000014
>> #define GMAC_RX_FLOW_CTRL 0x00000090
>> #define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
>> +#define GMAC_RXQ_CTRL0 0x000000a0
>> #define GMAC_INT_STATUS 0x000000b0
>> #define GMAC_INT_EN 0x000000b4
>> #define GMAC_PCS_BASE 0x000000e0
>> @@ -44,6 +45,9 @@
>>
>> #define GMAC_MAX_PERFECT_ADDRESSES 128
>>
>> +/* MAC RX Queue Enable*/
>> +#define GMAC_RX_QUEUE_ENABLE(queue) BIT(queue * 2)
>
> Always have parentheses around a variable in a
> macro, otherwise strange things could happen.
> Imagine if you send 5 - 4 as argument,
> it will then expand to 5 - 4 * 2 = -3,
> instead of (5 - 4) * 2 = 2
Right. I am going to do that.
>
>> +
>> /* MAC Flow Control RX */
>> #define GMAC_RX_FLOW_CTRL_RFE BIT(0)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> index eaed7cb..7ec1887 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
>> @@ -59,6 +59,16 @@ static void dwmac4_core_init(struct mac_device_info *hw,
>> int mtu)
>> writel(value, ioaddr + GMAC_INT_EN);
>> }
>>
>> +static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
>> +{
>> + void __iomem *ioaddr = hw->pcsr;
>> + u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
>> +
>> + value |= GMAC_RX_QUEUE_ENABLE(queue);
>> +
>> + writel(value, ioaddr + GMAC_RXQ_CTRL0);
>> +}
>> +
>> static void dwmac4_dump_regs(struct mac_device_info *hw)
>> {
>> void __iomem *ioaddr = hw->pcsr;
>> @@ -392,6 +402,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct
>> stmmac_extra_stats *x)
>> static const struct stmmac_ops dwmac4_ops = {
>> .core_init = dwmac4_core_init,
>> .rx_ipc = dwmac4_rx_ipc_enable,
>> + .rx_queue_enable = dwmac4_rx_queue_enable,
>> .dump_regs = dwmac4_dump_regs,
>> .host_irq_status = dwmac4_irq_status,
>> .flow_ctrl = dwmac4_flow_ctrl,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 3e40578..e30034d 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -1271,6 +1271,24 @@ static void free_dma_desc_resources(struct
>> stmmac_priv *priv)
>> }
>>
>> /**
>> + * stmmac_mac_enable_rx_queues - Enable MAC rx queues
>> + * @priv: driver private structure
>> + * Description: It is used for enabling the rx queues in the MAC
>> + */
>> +static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
>> +{
>> + int rx_count = priv->dma_cap.number_rx_channel;
>
> priv->dma_cap.number_rx_channel
> actually contains the value from register
> MAC_HW_Feature2, field RXCHCNT,
> which is the number of DMA rx channels.
>
> This is not the same as the number of MTL
> receive queues, field RXQCNT in MAC_HW_Feature2.
>
> I guess they will often have the same value,
> but since there actually are two different fields
> for them, I suppose that is not always the case.
Yes, you typically have a match between channels and queues.
But I can use RXQCNT of course, I agree.
>
>
>
> Reading the comments in dwmac4_dma.*
>
> #define DMA_CHANNEL_NB_MAX 1
>
> "Only Channel 0 is actually configured and used"
>
> "Following code only done for channel 0, other channels not yet supported"
>
> Is there any point in actually enabling more than RX queue 0 if the
> driver does not yet support more than one channel.
> Can RXCHCNT ever be different from RXQCNT?
> If so, when? Maybe when using an external DMA IP?
Yes, currently stmmac only supports 1 Channel. Bt it needs this feature if the
hardware is multi-channel. The hardware I have is multi-channel and so you have
to enable RX queue for it to work and that's why I made this fix.
In the future I will develope multi channel support for stmmac and this RX queue
enable will be already made.
>
>
>> + int queue = 0;
>> +
>> + /* If GMAC does not have multiqueues, then this is not necessary*/
>> + if (rx_count == 1)
>> + return;
>> +
>> + for (queue = 0; queue < rx_count; queue++)
>> + priv->hw->mac->rx_queue_enable(priv->hw, queue);
>> +}
>> +
>> +/**
>> * stmmac_dma_operation_mode - HW DMA operation mode
>> * @priv: driver private structure
>> * Description: it is used for configuring the DMA operation mode register
>> in
>> @@ -1691,6 +1709,9 @@ static int stmmac_hw_setup(struct net_device *dev,
>> bool init_ptp)
>> /* Initialize the MAC Core */
>> priv->hw->mac->core_init(priv->hw, dev->mtu);
>>
>> + /* Initialize MAC RX Queues */
>> + stmmac_mac_enable_rx_queues(priv);
>> +
>> ret = priv->hw->mac->rx_ipc(priv->hw);
>> if (!ret) {
>> netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
>
