Hi All,
This is a follow-up on the v2 patch series.
Following is updated:
- Spelling
- consistent spaces
- error handling of send_ioctl()
Old cover letters included below.
Please review.
Best regards
Allan and Raju
Raju Lakkaraju (2):
ethtool-copy.h:sync with net
Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY
downshift
ethtool-copy.h | 18 +++++++-
ethtool.8.in | 39 ++++++++++++++++
ethtool.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 200 insertions(+), 1 deletion(-)
> From c235004654ee0212b6cf6ca7af14eb6ef8a04dee Mon Sep 17 00:00:00 2001
> From: "Allan W. Nielsen" <allan.niel...@microsemi.com>
> Date: Mon, 14 Nov 2016 10:22:03 +0100
> Subject: [PATCH ethtool v2 0/2] Adding downshift support to ethtool
>
> This is a follow-up on the patch series posted at Fri, 4 Nov 2016 11:27:31
> +0100
> (old cover letter included below).
>
> The following is changed/added/addressed:
> - Syntax is changed from "--set-phy-tunable downshift on|off|%d" to
> "--set-phy-tunable [downshift on|off [count N]]" - as requested by Andrew.
> - Short description of downshifting is added to the man page.
>
> Old cover letter:
> > From 5d926ca56f13e283aaa98e820d4720305be4da8f Mon Sep 17 00:00:00 2001
> > From: "Allan W. Nielsen" <allan.niel...@microsemi.com>
> > Date: Fri, 4 Nov 2016 11:27:31 +0100
> > Subject: [PATCH ethtool 0/2] Adding downshift support to ethtool
> >
> > Hi All,
> >
> > This patch implements for set/get downshifting.
> >
> > Downshifting can either be turned on/off, or it can be configured to a
> > specifc count.
> >
> > If no "count" are provided, then it is up to the individual PHY driver to
> > configure a default count.
--
2.7.3
