Hi!
> > > > zd1201 is wifi adapter, yet it is hiding in drivers/usb/net where
> > > > noone can find it. This moves Kconfig/Makefile to right place; you
> > > > still need to manually move .c and .h files.
>
> > > do you think it should at least depend in some form or another on
> > > CONFIG_USB ?
> >
> > Right, added USB && to depends directive.
>
> Did you mean to only copy Jiri and LKML?
Yes, because this should go in as a git patch (so it is move, not
create new file), and I was hoping for Jiri to generate proper
git-patch :-).
> It seems like you should have sent at least sent this to
> netdev@vger.kernel.org, if not also to me, Jeroen Vreeken and/or
> possibly Greg K-H (USB subsystem).
>
> Will you be posting a new version, with the CONFIG_USB change?
Here it is, still
Signed-off-by: Pavel Machek <[EMAIL PROTECTED]>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index e0874cb..1eccdb3 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -503,6 +503,23 @@ config PRISM54
say M here and read <file:Documentation/modules.txt>. The module
will be called prism54.ko.
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on USB && NET_RADIO
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
+
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index c867798..512603d 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -40,3 +40,5 @@ obj-$(CONFIG_BCM43XX) += bcm43xx/
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
+
+obj-$(CONFIG_USB_ZD1201) += zd1201.o
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index efd6ca7..0540596 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -301,21 +301,4 @@ config USB_NET_ZAURUS
some cases CDC MDLM) protocol, not "g_ether".
-config USB_ZD1201
- tristate "USB ZD1201 based Wireless device support"
- depends on NET_RADIO
- select FW_LOADER
- ---help---
- Say Y if you want to use wireless LAN adapters based on the ZyDAS
- ZD1201 chip.
-
- This driver makes the adapter appear as a normal Ethernet interface,
- typically on wlan0.
-
- The zd1201 device requires external firmware to be loaded.
- This can be found at http://linux-lc100020.sourceforge.net/
-
- To compile this driver as a module, choose M here: the
- module will be called zd1201.
-
endmenu
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile
index a21e6ea..160f19d 100644
--- a/drivers/usb/net/Makefile
+++ b/drivers/usb/net/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_USB_NET_RNDIS_HOST) += rndi
obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
-obj-$(CONFIG_USB_ZD1201) += zd1201.o
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
