A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup
led_pin initial") that broken the WLAN status led on my laptop with
AR9287 after suspending and resuming.Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Cc: Miaoqing Pan <miaoq...@codeaurora.org> Cc: Kalle Valo <kv...@qca.qualcomm.com> Cc: <sta...@vger.kernel.org> Signed-off-by: Giedrius Statkevičius <giedrius.statkevic...@gmail.com> --- This patch should be applied to all 4.7 and later kernels Another user complaining about probably the same problem: https://bugzilla.kernel.org/show_bug.cgi?id=151711 drivers/net/wireless/ath/ath9k/main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 8b63988..121dc05 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw) if (!ath_complete_reset(sc, false)) ah->reset_power_on = false; - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 1 : 0); + ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + } /* * Reset key cache to sane defaults (all entries cleared) instead of @@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); + ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL); + } ath_prepare_reset(sc); -- 2.9.3
