Hello Sergei,

On Aug 29, 2016, Sergei Shtylyov wrote:
>    SH7757 is not the only platform with TSU, there's e.g. R8A7740 ARM
> SoC which only has 1 GETHER channel...

I don't have the R8A7740 manual (R-Mobile A1) so I can't see. But even if it 
does not have the POST registers, it might not hurt anything.

I just looked at the RZ/A1 register space and there seems to be dummy registers 
in the POST1-4 area. I can write to them and read back what I wrote...which is 
all that the sh_eth driver cares about. I bet when the designers bring in the 
EtherC IP block, the entire register address is always populated with a simple 
latch registers. And then, if a feature is not included (like relay/POST), then 
nothing is hooked up on the back side of it.

So, the 'easiest' solution is to just put the registers into the 
sh_eth_offset_fast_rz array and not try to make things more complicated.
        [TSU_TEN]       = 0x0064,
+       [TSU_POST1]     = 0x0070,
+       [TSU_POST2]     = 0x0074,
+       [TSU_POST3]     = 0x0078,
+       [TSU_POST4]     = 0x007c,


Chris

Reply via email to