This mini-series (which follows several other series on which it depends) gets rid of the Assabet/Neponset hack in the smc91x driver.
In order to do that, we need to get several pieces in place first: * gpiolib support throughout SA11x0/Assabet/Neponset so that we can represent control signals through gpiolib * CCF support, so we can re-use the code in drivers/clk to implement the external crystal oscillator attached to the SMC91x. This external crystal oscillator is enabled via a control signal. This series: - performs the SA11x0 CCF conversion - adds an optional clock to SMC91x to cater for an external crystal oscillator - switches the Neponset code to provide a 'struct clk' representing this oscillator - removes the SMC91x hack to assert the enable signal This results in the platform specific includes being removed from the SMC91x driver. Please ack these changes; due to the dependencies, I wish to merge them through my tree. Thanks. arch/arm/Kconfig | 1 + arch/arm/mach-sa1100/clock.c | 191 +++++++++++++++++-------------------- arch/arm/mach-sa1100/neponset.c | 42 ++++++++ drivers/net/ethernet/smsc/smc91x.c | 47 ++++++--- drivers/net/ethernet/smsc/smc91x.h | 1 + 5 files changed, 166 insertions(+), 116 deletions(-) -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.