Management firmware requires the selection-field (SF) to be set for
configuring the application/protocol entry in IEEE mode. Without this
setting, the app entry will be configured incorrectly in MFW.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kall...@qlogic.com>
Signed-off-by: Yuval Mintz <yuval.mi...@qlogic.com>
---
drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
index 7ad1667..192a886 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c
@@ -1063,23 +1063,31 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn,
for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) {
entry = &p_app->app_pri_tbl[i].entry;
if (ieee) {
- *entry &= ~DCBX_APP_SF_IEEE_MASK;
+ *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK);
switch (p_params->app_entry[i].sf_ieee) {
case QED_DCBX_SF_IEEE_ETHTYPE:
*entry |= ((u32)DCBX_APP_SF_IEEE_ETHTYPE <<
DCBX_APP_SF_IEEE_SHIFT);
+ *entry |= ((u32)DCBX_APP_SF_ETHTYPE <<
+ DCBX_APP_SF_SHIFT);
break;
case QED_DCBX_SF_IEEE_TCP_PORT:
*entry |= ((u32)DCBX_APP_SF_IEEE_TCP_PORT <<
DCBX_APP_SF_IEEE_SHIFT);
+ *entry |= ((u32)DCBX_APP_SF_PORT <<
+ DCBX_APP_SF_SHIFT);
break;
case QED_DCBX_SF_IEEE_UDP_PORT:
*entry |= ((u32)DCBX_APP_SF_IEEE_UDP_PORT <<
DCBX_APP_SF_IEEE_SHIFT);
+ *entry |= ((u32)DCBX_APP_SF_PORT <<
+ DCBX_APP_SF_SHIFT);
break;
case QED_DCBX_SF_IEEE_TCP_UDP_PORT:
*entry |= ((u32)DCBX_APP_SF_IEEE_TCP_UDP_PORT <<
DCBX_APP_SF_IEEE_SHIFT);
+ *entry |= ((u32)DCBX_APP_SF_PORT <<
+ DCBX_APP_SF_SHIFT);
break;
}
} else {
--
1.8.3.1
