On Wed, Aug 24, 2016 at 11:58:01AM +0000, Raju Lakkaraju wrote:
> From: Nagaraju Lakkaraju <raju.lakkar...@microsemi.com>
>
> This is Microsemi's VSC 85xx PHY register definitions header file.
Hi Raju
Patch [0/X] is the cover note. It should contain an overview of the
patch series and why this patch series is needed. It should not
contain a patch itself.
Also, the 5 patches have not been threaded together. Did you send them
with a single git send-email command, or 5 individual commands? By
default, using a single command should cause them to be threaded.
Andrew
>
> Signed-off-by: Nagaraju Lakkaraju <raju.lakkar...@microsemi.com>
> ---
> drivers/net/phy/mscc_reg.h | 135
> +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 135 insertions(+)
> create mode 100644 drivers/net/phy/mscc_reg.h
>
> diff --git a/drivers/net/phy/mscc_reg.h b/drivers/net/phy/mscc_reg.h
> new file mode 100644
> index 0000000..ddb825c
> --- /dev/null
> +++ b/drivers/net/phy/mscc_reg.h
> @@ -0,0 +1,135 @@
> +/*
> + * Driver for Microsemi VSC85xx PHYs
> + *
> + * Author: Nagaraju Lakkaraju
> + * License: Dual MIT/GPL
> + * Copyright (c) 2016 Microsemi Corporation
> + */
> +
> +#ifndef __MSCC_REG_H
> +#define __MSCC_REG_H
> +
> +/* Microsemi VSC85xx PHY registers */
> +/* IEEE 802. Std Registers */
> +#define MSCC_PHY_BYPASS_CONTROL 18
> +#define DISABLE_HP_AUTO_MDIX_MASK 0x0080
> +#define DISABLE_PAIR_SWAP_CORR_MASK 0x0020
> +#define DISABLE_POLARITY_CORR_MASK 0x0010
> +
> +#define MSCC_PHY_EXT_PHY_CNTL_1 23
> +#define MAC_IF_SELECTION_MASK 0x1800
> +#define MAC_IF_SELECTION_GMII 0
> +#define MAC_IF_SELECTION_RMII 1
> +#define MAC_IF_SELECTION_RGMII 2
> +#define MAC_IF_SELECTION_POS 11
> +#define FAR_END_LOOPBACK_MODE_MASK 0x0008
> +
> +#define MSCC_PHY_EXT_PHY_CNTL_2 24
> +#define CONNECTOR_LOOPBACK_MASK 0x0001
> +#define JUMBO_PACKET_MODE_MASK 0x0030
> +#define JUMBO_PACKET_MODE_POS 4
> +
> +#define MII_VSC85XX_INT_MASK 25
> +#define MII_VSC85XX_INT_MASK_MDINT 0x8000
> +#define MII_VSC85XX_INT_MASK_SPEED 0x4000
> +#define MII_VSC85XX_INT_MASK_LINK 0x2000
> +#define MII_VSC85XX_INT_MASK_DUPLEX 0x1000
> +#define MII_VSC85XX_INT_MASK_ANEG_ERR 0x0800
> +#define MII_VSC85XX_INT_MASK_ANEG_COM 0x0400
> +#define MII_VSC85XX_INT_MASK_POE 0x0200
> +#define MII_VSC85XX_INT_MASK_SYM 0x0100
> +#define MII_VSC85XX_INT_MASK_FLF 0x0080
> +#define MII_VSC85XX_INT_MASK_WOL 0x0040
> +#define MII_VSC85XX_INT_MASK_EXT 0x0020
> +#define MII_VSC85XX_INT_MASK_RESV 0x0010
> +#define MII_VSC85XX_INT_MASK_FCI 0x0008
> +#define MII_VSC85XX_INT_MASK_LDI 0x0004
> +#define MII_VSC85XX_INT_MASK_MSE 0x0002
> +#define MII_VSC85XX_INT_MASK_RX_ER 0x0001
> +#define MII_VSC85XX_INT_MASK_MASK 0xa000
> +
> +#define MII_VSC85XX_INT_STATUS 26
> +#define MSCC_PHY_DEV_AUX_CNTL 28
> +#define HP_AUTO_MDIX_X_OVER_IND_MASK 0x2000
> +#define ACTIPHY_TIME_OUT_BIT_7 0x0080
> +#define ACTIPHY_TIME_OUT_BIT_2 0x0004
> +#define ACTIPHY_TIME_OUT_MASK 0x0084
> +#define ACTIPHY_MODE_ENT 0x0040
> +
> +#define MSCC_EXT_PAGE_ACCESS 31
> +#define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */
> +#define MSCC_PHY_PAGE_EXTENDED 0x0001 /* Extended registers */
> +#define MSCC_PHY_PAGE_EXTENDED_2 0x0002 /* Extended registers - page 2
> */
> +#define MSCC_PHY_PAGE_EXTENDED_3 0x0003 /* Extended registers - page 3
> */
> +#define MSCC_PHY_PAGE_EXTENDED_4 0x0004 /* Extended registers - page 4
> */
> +#define MSCC_PHY_PAGE_GPIO 0x0010 /* GPIO registers */
> +
> +/* Extended Page 1 Registers */
> +#define MSCC_PHY_EXT_MODE_CNTL 19
> +#define FORCE_MDI_CROSSOVER_MASK 0x000C
> +#define FORCE_MDI_CROSSOVER_NORMAL 0
> +#define FORCE_MDI_CROSSOVER_MDI 2
> +#define FORCE_MDI_CROSSOVER_MDIX 3
> +#define FORCE_MDI_CROSSOVER_POS 2
> +
> +#define MSCC_PHY_ACTIPHY_CNTL 20
> +#define ACTIPHY_SLEEP_TIMER_MASK 0x6000
> +#define ACTIPHY_SLEEP_TIMER_POS 13
> +#define ACTIPHY_WAKEUP_TIMER_MASK 0x1800
> +#define ACTIPHY_WAKEUP_TIMER_POS 11
> +#define LINK_SPD_DOWNSHIFT_EN 0x0010
> +#define LINK_SPD_DOWNSHIFT_CNTL_POS 2
> +#define LINK_SPD_DOWNSHIFT_CNTL_MASK 0x000C
> +
> +#define MSCC_PHY_POE_MISC 23
> +#define INLINE_POE_DETECTION 0x0400
> +#define INLINE_POE_STATUS_MASK 0x0300
> +#define INLINE_POE_STATUS_POS 8
> +
> +/* Extended Page 2 Registers */
> +#define MSCC_PHY_RGMII_CNTL 20
> +#define FLF2_ENABLE 0x8000
> +#define SOF_ENABLE 0x1000
> +#define RGMII_RX_CLK_DELAY_MASK 0x0070
> +#define RGMII_RX_CLK_DELAY_POS 4
> +
> +#define MSCC_PHY_WOL_LOWER_MAC_ADDR 21
> +#define MSCC_PHY_WOL_MID_MAC_ADDR 22
> +#define MSCC_PHY_WOL_UPPER_MAC_ADDR 23
> +#define MSCC_PHY_WOL_LOWER_PASSWD 24
> +#define MSCC_PHY_WOL_MID_PASSWD 25
> +#define MSCC_PHY_WOL_UPPER_PASSWD 26
> +
> +#define MSCC_PHY_WOL_MAC_CONTROL 27
> +#define EDGE_RATE_CNTL_POS 5
> +#define EDGE_RATE_CNTL_MASK 0x00E0
> +#define SECURE_ON_ENABLE 0x8000
> +#define SECURE_ON_PASSWD_LEN_4 0x4000
> +
> +#define MSCC_PHY_RING_RESI_CONTROL 30
> +#define RR_STARTUP_ENABLE 0x8000
> +#define RR_ADVERTISE_ENABLE 0x4000
> +#define RR_LP_ADVERTISE 0x2000
> +#define RR_FORCE_ENABLE 0x1000
> +#define RR_STATUS_MASK 0x0030
> +#define RR_STATUS_POS 4
> +
> +/* GPIO registers */
> +#define MSCC_GPIO_CONTROL_2 14
> +#define COMA_MODE_EN 0x2000
> +#define COMA_MODE_OUTPUT 0x1000
> +#define COMA_MODE_INPUT 0x0800
> +
> +#define MSCC_RECOVERED_CLK_CONTROL 23
> +#define RCVRD_CLK_EN 0x8000
> +#define CLK_FREQUENCY_SELECT_MASK 0x0700
> +#define CLK_SQUELCH_LVL_MASK 0x0030
> +#define CLK_SELECTION_MASK 0x0007
> +#define CLK_FREQUENCY_SELECT_POS 8
> +#define CLK_SQUELCH_LVL_POS 4
> +
> +/* Microsemi PHY ID's */
> +#define PHY_ID_VSC8531 0x00070570
> +#define PHY_ID_VSC8541 0x00070770
> +
> +#endif /* __MSCC_REG_H */
> --
> 2.7.4
>
