[EMAIL PROTECTED] wrote: > > http://bugzilla.kernel.org/show_bug.cgi?id=6548
I cc'ed the developers. Please use reply-to-all henceforth on this bug and don't make updates via the bugzilla web interface, thanks. > Summary: MPPE Encrypt Decrypt module bug. > Kernel Version: 2.6.16.16 > Status: NEW > Severity: normal > Owner: [EMAIL PROTECTED] > Submitter: [EMAIL PROTECTED] > > > Most recent kernel where this bug did not occur: none > Distribution: > Hardware Environment: > > cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 8 > model name : Celeron (Coppermine) > stepping : 3 > cpu MHz : 855.153 > cache size : 128 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov > pat > pse36 mmx fxsr sse > bogomips : 1712.02 > > > cat /proc/iomem > 00000000-0009ffff : System RAM > 000a0000-000bffff : Video RAM area > 000c0000-000cbfff : Video ROM > 000f0000-000fffff : System ROM > 00100000-2ffebfff : System RAM > 00100000-003190ce : Kernel code > 003190cf-003d518b : Kernel data > 2ffec000-2ffeefff : ACPI Tables > 2ffef000-2fffefff : reserved > 2ffff000-2fffffff : ACPI Non-volatile Storage > 40000000-4000ffff : 0000:00:0b.0 > d6000000-d60003ff : 0000:00:0b.0 > d6000000-d60003ff : @ > &R;e i¦u*PAa? > d6800000-d68000ff : 0000:00:0a.0 > d6800000-d68000ff : 8139too > d7000000-d7dfffff : PCI Bus #01 > d7000000-d700ffff : 0000:01:00.0 > d7000000-d700ffff : radeonfb mmio > d7f00000-e3ffffff : PCI Bus #01 > d7fe0000-d7ffffff : 0000:01:00.0 > d8000000-dfffffff : 0000:01:00.0 > d8000000-dfffffff : radeonfb framebuffer > e4000000-e7ffffff : 0000:00:00.0 > ffff0000-ffffffff : reserved > > ============ > cat /proc/ioports > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 02f8-02ff : serial > 0376-0376 : ide1 > 0378-037a : parport0 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 03f8-03ff : serial > 0cf8-0cff : PCI conf1 > 9400-94ff : 0000:00:0b.0 > 9400-94ff : @ > &ie R;¦iu*PAa? > 9800-98ff : 0000:00:0a.0 > 9800-98ff : 8139too > a000-a003 : 0000:00:04.5 > a400-a403 : 0000:00:04.5 > a800-a8ff : 0000:00:04.5 > b000-b01f : 0000:00:04.3 > b400-b41f : 0000:00:04.2 > b800-b80f : 0000:00:04.1 > b800-b807 : ide0 > b808-b80f : ide1 > d000-dfff : PCI Bus #01 > d800-d8ff : 0000:01:00.0 > e400-e4ff : 0000:00:04.4 > e400-e47f : motherboard > e400-e403 : PM1a_EVT_BLK > e404-e405 : PM1a_CNT_BLK > e408-e40b : PM_TMR > e410-e415 : ACPI CPU throttle > e420-e423 : GPE0_BLK > e800-e80f : 0000:00:04.4 > e800-e80f : motherboard > e800-e80f : pnp 00:02 > > ========== > > lspci -vvv > 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] > (rev c4) > Subsystem: ASUSTeK Computer Inc.: Unknown device 8020 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR+ > Latency: 0 > Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- > 64bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<none> > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x > AGP] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: d7000000-d7dfffff > Prefetchable memory behind bridge: d7f00000-e3ffffff > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev > 22) > Subsystem: ASUSTeK Computer Inc.: Unknown device 8020 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:04.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) (prog-if 8a > [Master SecP PriP]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 > Region 4: I/O ports at b800 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 10) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32, Cache Line Size 08 > Interrupt: pin D routed to IRQ 5 > Region 4: I/O ports at b400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 10) (prog-if 00 [UHCI]) > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32, Cache Line Size 08 > Interrupt: pin D routed to IRQ 5 > Region 4: I/O ports at b000 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev > 30) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin ? routed to IRQ 9 > Capabilities: [68] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 > Audio Controller (rev 20) > Subsystem: ASUSTeK Computer Inc.: Unknown device 11d4 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin C routed to IRQ 12 > Region 0: I/O ports at a800 [size=256] > Region 1: I/O ports at a400 [size=4] > Region 2: I/O ports at a000 [size=4] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL- > 8139/8139C/8139C+ (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RT8139 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 12 > Region 0: I/O ports at 9800 [size=256] > Region 1: Memory at d6800000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0- > ,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0b.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M > Ethernet PCI Adapter > Subsystem: Surecom Technology: Unknown device 1320 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (8000ns min, 16000ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 9400 [size=256] > Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=1K] > [virtual] Expansion ROM at 40000000 [disabled] [size=64K] > Capabilities: [88] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0-,D1+,D2- > ,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY > [Radeon 7000/VE] (prog-if 00 [VGA]) > Subsystem: Palit Microsystems Inc.: Unknown device 5159 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (2000ns min), Cache Line Size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at d800 [size=256] > Region 2: Memory at d7000000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at d7fe0000 [disabled] [size=128K] > Capabilities: [58] AGP version 2.0 > Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- > 64bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- > Rate=<none> > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2- > ,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > ================================ > > > > > Software Environment:Linux version 2.6.15.6 Fedora Core 3 > > env > HOSTNAME=stdafx.net > TERM=linux > SHELL=/bin/bash > HISTSIZE=1000 > USER=root > LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33; > 01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:* > .btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01; > 31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01; > 31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp > =01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35: > CXXFLAGS=-O3 -funroll-loops -ffast-math -malign-double -mcpu=pentiumpro - > march=pentiumpro -fomit-frame-pointer -fno-exceptions > MC_TMPDIR=/tmp/mc-root > PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin: > /bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin > MAIL=/var/spool/mail/root > PWD=/usr/local/src/linux-2.6.16.16 > INPUTRC=/etc/inputrc > LANG=en_US.UTF-8 > HISTCONTROL=ignorespace > HOME=/root > SHLVL=2 > CFLAGS=-O3 -funroll-loops -ffast-math -malign-double -mcpu=pentiumpro - > march=pentiumpro -fomit-frame-pointer -fno-exceptions > MC_SID=3607 > LOGNAME=root > LESSOPEN=|/usr/bin/lesspipe.sh %s > G_BROKEN_FILENAMES=1 > OLDPWD=/usr/local/src/linux-2.6.15.6 > _=/bin/env > > > > Problem Description: > > MPPE doesnt work correctly with any VPN daemons (such pptpd) > when requesting some URL's such > ya.ru or microsoft.com > > > Steps to reproduce: download pptpd at http://www.poptop.org/ or any other VPN > daemon that supports MPPE > > in /etc/ppp/options.pptpd turn MPPE encryption ON > require-mppe-128 > or > #require-mppe-40 > > Connect to VPN and try goto over vpn : www.ya.ru or microsoft.com (and try to > use windows update) > > Explorer freeze while timeout not reach > > without MPPE option this site works fine. > I think that it is a bug in the Encrypt Decrypt data To/FROM MPPE > > P.S Try connect to ya.ru in telnet and type GET / > when mppe enabled > > ------- You are receiving this mail because: ------- > You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
