On Thursday, July 14, 2016 4:29:43 PM CEST Philipp Zabel wrote:
> +
> + - micrel,fiber-mode: If present the PHY is configured to operate in fiber
> mode
> +
> + Some PHYs, such as the KSZ8041FTL variant, support fiber mode, enabled
> + by the FXEN boot strapping pin. It can't be determined from the PHY
> + registers whether the PHY is in fiber mode, so this boolean device
> tree
> + property can be used to describe it.
> +
> + In fiber mode, auto-negotiation is disabled and the PHY can only work
> in
> + 100base-fx (full and half duplex) modes.
>
Could the generic "phy-mode" property used for this, to avoid the need for
definingn a custom property?
Arnd
