From: Jiri Pirko <j...@mellanox.com> This patchset introduces router interfaces. At this point the router still operates in slowpath, but that's needed in order not to introduce a regression.
Ido Schimmel (16): mlxsw: spectrum: Send untagged packets through a port netdev mlxsw: spectrum: Remove VLANs configuration via SELF flag mlxsw: spectrum: Sync PVID vPort LAG status mlxsw: spectrum: Remove RIF from PVID vPort when joining / leaving LAG mlxsw: reg: Add Router General Configuration Register mlxsw: spectrum: Initialize ports at the end of init sequence mlxsw: spectrum_router: Add basic ipv4 router initialization mlxsw: spectrum: Add router interface struct mlxsw: reg: Add FDB action to forward to router mlxsw: reg: Add Router Interface Table Register mlxsw: spectrum: Use action 'discard' when removing traps mlxsw: spectrum: Edit RIF properties based on netdev events mlxsw: spectrum: Introduce support for router interfaces mlxsw: spectrum: Unsplit the vFID range mlxsw: spectrum: Configure FIDs based on bridge events mlxsw: spectrum: Enable L3 interfaces on top of bridge devices Jiri Pirko (2): mlxsw: spectrum: Add traps needed for router implementation mlxsw: spectrum: Add couple of lower device helper functions drivers/net/ethernet/mellanox/mlxsw/Makefile | 2 +- drivers/net/ethernet/mellanox/mlxsw/reg.h | 276 ++++- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1158 ++++++++++++++------ drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 93 +- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 68 ++ .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 107 +- drivers/net/ethernet/mellanox/mlxsw/trap.h | 5 + include/linux/netdevice.h | 18 + net/core/dev.c | 46 + 9 files changed, 1358 insertions(+), 415 deletions(-) create mode 100644 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c -- 2.5.5
