Commit 7f854420fbfe9d49afe2ffb1df052cfe8e215541
("phy: Add API for {un}registering an mdio device to a bus.")
broke PHY detection on this driver with a copy-paste bug:
The code is looking 32 times for a PHY at address 0.

Fixes ethernet on AMD DB1100/DB1500/DB1550 boards which have
their (autodetected) PHYs at address 31.

Cc: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Manuel Lauss <manuel.la...@gmail.com>
---
v2: unbreak "use highest phy addr" case.

before:
libphy: au1000_eth_mii: probed
au1000-eth au1000-eth.0 (unnamed net_device) (uninitialized): no PHY found
au1000-eth: probe of au1000-eth.0 failed with error -1

after:
libphy: au1000_eth_mii: probed
AM79C874 au1000-eth-0:1f: attached PHY driver [AM79C874] 
(mii_bus:phy_addr=au1000-eth-0:1f, irq=-1)
au1000-eth au1000-eth.0 eth0: Au1xx0 Ethernet found at 0x11500000, irq 36

 drivers/net/ethernet/amd/au1000_eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amd/au1000_eth.c 
b/drivers/net/ethernet/amd/au1000_eth.c
index e0fb0f1..20760e1 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -509,8 +509,8 @@ static int au1000_mii_probe(struct net_device *dev)
         * on the current MAC's MII bus
         */
        for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
-               if (mdiobus_get_phy(aup->mii_bus, aup->phy_addr)) {
-                       phydev = mdiobus_get_phy(aup->mii_bus, aup->phy_addr);
+               if (mdiobus_get_phy(aup->mii_bus, phy_addr)) {
+                       phydev = mdiobus_get_phy(aup->mii_bus, phy_addr);
                        if (!aup->phy_search_highest_addr)
                                /* break out with first one found */
                                break;
-- 
2.8.4

Reply via email to