Hi all,
This patch series builds on top of Andrew's "New DSA bind, switches as devices"
patch set and does the following:
- add a few helper functions/goodies for net/dsa/dsa2.c to be as close as
possible
from net/dsa/dsa.c in terms of what drivers can expect, in particular the
slave
MDIO bus and the enabled_port_mask and phy_mii_mask
- fix the CPU port ethtools ops to work in a multiple tree setup since we can
no longer assume a single tree is supported
- make the bcm_sf2 driver register its own MDIO bus, yet assign it to
ds->slave_mii_bus for everything to work in net/dsa/slave.c wrt. PHY probing,
this is a tad cleaner than what we have now
Changes in v2:
Most of the previous patches have been dropped to just keep the relevant ones
now.
Changes in v3:
- split the addition of the slave MII bus as a separate patch
- properly unwind all operations at the right place and right time (ethtool ops,
slave MDIO bus
- fixed a few typos here and there
Changes in v4:
- removed superfluous dst agrument to dsa_cpu_port_ethtool_{setup,restore}
Florian Fainelli (6):
net: dsa: Provide unique DSA slave MII bus names
net: dsa: Initialize ds->enabled_port_mask and ds->phys_mii_mask
net: dsa: Provide a slave MII bus if needed
net: dsa: Add initialization helper for CPU port ethtool_ops
net: dsa: Initialize CPU port ethtool ops per tree
net: dsa: bcm_sf2: Register our slave MDIO bus
drivers/net/dsa/bcm_sf2.c | 215 +++++++++++++++++++++++++++++-----------------
drivers/net/dsa/bcm_sf2.h | 6 ++
include/net/dsa.h | 1 +
net/dsa/dsa.c | 41 +++++++++
net/dsa/dsa2.c | 36 ++++++++
net/dsa/dsa_priv.h | 5 ++
net/dsa/slave.c | 25 ++----
7 files changed, 232 insertions(+), 97 deletions(-)
--
2.7.4
