Binding doc for NS2 PCIe PHYs.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: Pramod Kumar <[email protected]>
---
.../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
new file mode 100644
index 0000000..5b51007
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
@@ -0,0 +1,27 @@
+* Broadcom NS2 PCIe PHY binding document
+
+Required bus properties:
+- reg: MDIO Bus number for the MDIO interface
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Required PHY properties:
+- compatible: should be "brcm,ns2-pcie-phy"
+- reg: MDIO Phy ID for the MDIO interface
+- #phy-cells: must be 0
+
+This is a child bus node of "brcm,mdio-mux-iproc" node.
+
+Example:
+
+mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pci_phy0: pci-phy@0 {
+ compatible = "brcm,ns2-pcie-phy";
+ reg = <0x0>;
+ #phy-cells = <0>;
+ };
+};
--
1.9.1
