Am 04.06.2016 um 16:43 schrieb Langer, Thomas:
> Hello Hauke,
>
> [...]
>> +
>> +static int xway_gphy_ack_interrupt(struct phy_device *phydev)
>> +{
>> + int reg;
>> +
>> + /**
>> + * Possible IRQ numbers:
>> + * - IM3_IRL18 for GPHY0
>> + * - IM3_IRL17 for GPHY1
>
> These are references to the SoC interrupts.
>
>> + *
>> + * Due to a silicon bug IRQ lines are not really independent from
>> + * each other. Sometimes the two lines are driven at the same time
>> + * if only one GPHY core raises the interrupt.
>
> So this errata sounds like a SoC errata, not an errata for the PHY.
>
this comment is a remnant from the first driver version which was mainly
used on a VRX200 SoC. But interrupts are generally working fine so this
comment should be removed.
--
- Daniel
