[PATCH net 8/8] qed: Don't config min BW on 100g on link flap

[Yuval Mintz]

Currently 100g devices don't support minimum/maximum BW configurations,
yet link flaps might cause the driver to attempt to do such a
configuration. Prevent this just as we do for the maximum BW.

Signed-off-by: Yuval Mintz <yuval.mi...@qlogic.com>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c 
b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 579c6d5..2d89e8c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -2105,6 +2105,13 @@ void qed_configure_vp_wfq_on_link_change(struct qed_dev 
*cdev, u32 min_pf_rate)
 {
        int i;
 
+       if (cdev->num_hwfns > 1) {
+               DP_VERBOSE(cdev,
+                          NETIF_MSG_LINK,
+                          "WFQ configuration is not supported for this 
device\n");
+               return;
+       }
+
        for_each_hwfn(cdev, i) {
                struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
 
-- 
1.9.3