Lino Sanfilippo <linosanfili...@gmx.de> :
[...]
> --- a/drivers/net/ethernet/arc/emac_main.c
> +++ b/drivers/net/ethernet/arc/emac_main.c
> @@ -159,12 +159,22 @@ static void arc_emac_tx_clean(struct net_device *ndev)
> unsigned int *txbd_dirty = &priv->txbd_dirty;
> struct arc_emac_bd *txbd = &priv->txbd[*txbd_dirty];
> struct buffer_state *tx_buff = &priv->tx_buff[*txbd_dirty];
> - struct sk_buff *skb = tx_buff->skb;
> unsigned int info = le32_to_cpu(txbd->info);
> + struct sk_buff *skb;
>
Insert a smp_rmb() here to close one window for an outdated txbd_dirty value
(the "arc_emac_tx_clean wrote txbd_curr and issued smp_wmb" one).
Actually, insert smp_rmb() at the start of arc_emac_tx_clean() as it
does not need to be performed withing the loop and would penalize it.
Given the implicit smp barriers in the non-driver code, I consider
"arc_emac_tx_clean on one CPU does not read latest txbd_dirty value written
by previous arc_emac_tx_clean on different CPU" as utter onanism but
issueing smp_rmb() at the start of arc_emac_tx_clean() nails it as well.
> - if ((info & FOR_EMAC) || !txbd->data || !skb)
> + if (*txbd_dirty == priv->txbd_curr)
> break;
Ok, it's just the "while (priv->txbd_dirty != priv->txbd_curr) {" loop
in disguise.
>
> + /* Make sure curr pointer is consistent with info */
> + rmb();
> +
> + info = le32_to_cpu(txbd->info);
> +
> + if (info & FOR_EMAC)
> + break;
With proper ordering + barrier in arc_emac_tx() you can relax it to smp_rmb().
> +
> + skb = tx_buff->skb;
> +
> if (unlikely(info & (DROP | DEFR | LTCL | UFLO))) {
> stats->tx_errors++;
> stats->tx_dropped++;
> @@ -195,8 +205,8 @@ static void arc_emac_tx_clean(struct net_device *ndev)
> *txbd_dirty = (*txbd_dirty + 1) % TX_BD_NUM;
> }
>
> - /* Ensure that txbd_dirty is visible to tx() before checking
> - * for queue stopped.
> + /* Ensure that txbd_dirty is visible to tx() and we see the most recent
> + * value for txbd_curr.
> */
> smp_mb();
>
> @@ -680,35 +690,29 @@ static int arc_emac_tx(struct sk_buff *skb, struct
> net_device *ndev)
> dma_unmap_len_set(&priv->tx_buff[*txbd_curr], len, len);
>
> priv->txbd[*txbd_curr].data = cpu_to_le32(addr);
> -
> - /* Make sure pointer to data buffer is set */
> - wmb();
> + priv->tx_buff[*txbd_curr].skb = skb;
>
> skb_tx_timestamp(skb);
>
> *info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
No.
You need dma_wmb() after skb_tx_timestamp() to commit skb_tx_timestamp() [*]
and data = cpu_to_le32(addr).
[*] I doubt anyone want a dma_sync_single_...() here.
>
> - /* Make sure info word is set */
> + /* 1. Make sure that with respect to tx_clean everything is set up
> + * properly before we advance txbd_curr.
> + * 2. Make sure writes to DMA descriptors are completed before we inform
> + * the hardware.
> + */
> wmb();
Yes, either wmb() or smp_wmb() + dma_wmb().
>
> - priv->tx_buff[*txbd_curr].skb = skb;
> -
> /* Increment index to point to the next BD */
> *txbd_curr = (*txbd_curr + 1) % TX_BD_NUM;
>
> - /* Ensure that tx_clean() sees the new txbd_curr before
> - * checking the queue status. This prevents an unneeded wake
> - * of the queue in tx_clean().
> + /* Ensure we see the most recent value of txbd_dirty and tx_clean() sees
> + * the updated value of txbd_curr.
> */
> smp_mb();
Nit: s/the most/a/
"a" as in "arc_emac_tx_clean() _is_ racing with arc_emac_tx"
>
> - if (!arc_emac_tx_avail(priv)) {
> + if (!arc_emac_tx_avail(priv))
> netif_stop_queue(ndev);
> - /* Refresh tx_dirty */
> - smp_mb();
> - if (arc_emac_tx_avail(priv))
> - netif_start_queue(ndev);
> - }
No.
I may sound like an old record but the revalidation part must be kept.
txbd_dirty may change in the arc_emac_tx_avail.. netif_stop_queue window
(the race requires a different CPU as arc_emac_tx() runs in locally
disabled BH context).
--
Ueimor
